Текст страницы
English
7 Hog ring
Battery Type
The following tools operate on a 12 volt battery pack:
DCF901, DCF903
These battery packs may be used: . Refer to Technical Data for
more information.
Intended Use
These impact drivers are designed for professional impact
screwdriving applications. The impact function makes this
tool particularly useful for driving fasteners in wood, metal
and concrete.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
These impact drivers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
Package Contents
The package contains:
1 Impact wrench
1 Charger
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
1 Rubber Boot (G models)
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
WARNING: Use only DeWALT battery packs and chargers.
Markings on Tool
The following pictograms are shown on the tool:
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.
a
Anvil (Fig. A, D)
Read instruction manual before use. g
Wear ear protection. f
WARNING: Use only impact accessories. Non‑impact
accessories may break and cause a hazardous condition.
Inspect accessories prior to use to ensure that it contains
no cracks.
Visible radiation. Do not stare into light.
Wear eye protection. n
Date Code Position (Fig. A)
The date code 8 , which also includes the year of manufacture,
is printed into the housing.
Example:
CAUTION: Inspect anvils and hog rings prior to use.
Missing or damaged items should be replaced before use.
Place the switch in the locked off (centre) position or remove
battery pack before changing accessories.
To install an accessory on the hog ring anvil, firmly push
accessory onto the anvil 5 . The hog ring 7 compresses to
allow the accessory to slide on. After accessory is installed, the
hog ring applies pressure to help provide accessory retention.
To remove an accessory, grasp the accessory and firmly pull
it off.
2020 XX XX
Year and week of Manufacture
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Description (Fig. A)
1 Battery pack
OPERATION Instructions for Use
2 Battery release button
3 Trigger switch
WARNING: Always observe the safety instructions and applicable regulations.
4 Forward/reverse control button
5 Anvil
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.
6 Handle
9