Текст страницы
CORDLESS IMPACT DRILL
Model
PSB20H-13C/2
0-600/0-2100r/min
0-9000/0-31500ipm
110N·m(973.4 in-lbf)
objects such as nails or screwdrivers
or by force applied externally. An inter-
nal short circuit can occur and the battery
can burn, smoke, explode or overheat.
►The battery is supplied partially
20+1+1
2.08kg
charged. To ensure full battery capaci-
ty, completely charge the battery in the
battery charger before using for the
fi rst time.
►Read the operating instructions of the
Compatible battery
(availability may vary)
battery charger.
►Adjust the gear switch only when the
machine is at a complete stop.
► Always push the gear selector and turn
PH20-2.4A
PH20-3.0A
PH20-2.0 (2Аh)
PH20-3.0 (3Аh)
PH20-4.0 (4Аh)
PH20-5.0 (5Аh)
PH20-6.0 (6Аh)
Compatible charger
(availability varies by
package)
the operating mode selector switch
through to the stop. Otherwise, the ma-
chine can become damaged.
Product Description and Specifi-
cations
Contents of delivery
Cordless impact drill
1pc
Drill bit
6pcs
Double-sided bit
1pc
Additional handle
1pc
Metal bracket
1pc
Instruction manual
1pc
Rechargeable battery 4Ah
2pcs
Battery charger
1pc
Assembly
Battery Charging
Note: The battery supplied is partially
charged. To ensure full capacity of the battery,
completely charge the battery in the battery
charger before using your power tool for the
fi rst time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage
the battery.
The lithium-ion battery is protected against
deep discharging. When the battery is empty,
the machine is switched off by means of a
protective circuit: The inserted tool no longer
rotates.
►Do not continue to press the On/Off
Read all safety warnings and all in-
Read all safety warnings and all in-
structions.
structions. Failure
l
Failure to follow the
warnings and instructions may result
warnings and instructions may result
in electric shock, fi re and/or serious injury.
in electric shock, fi re and/or serious injury.
Intended Use
The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal, ceramics and plastic. Impact
drills are additionally intended for impact drill-
ing in bricks, brickwork and masonry.
The light of this power tool is intended to illu-
minate the power tool’s direct area of working
operation and is not suitable for household
room illumination.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
(1) Chuck jaws
(2) Keyless drill chuck
(3) Torque setting ring
(4) Choice of operating modes
(5) Speed switch
(6) Switch
(7) Rotation direction switch
(8) Backlight
(9) Battery release button
(10) Battery
(11) Handle (with insulated surface)
(12) Hanging bracket
(13) Additional handle
Technical Data
switch after the machine has been au-
tomatically switched off . The battery can
be damaged.
Removing the battery
The battery is equipped with two locking lev-
els that should prevent the battery from falling
out when pushing the battery unlocking but-
ton unintentionally. As long as the battery is
inserted in the power tool, it is held in position
by means of a spring.
Model
PSB20H-13C/2
DC 20V
Ø13mm(1/2")
5