Текст страницы
www.fubag.ru
O
m
perator's
anual
2. Technical pecifications
s
MODEL
FC 230/24 CM2
FC 230/50 CM2
Power, kW
1,5
1,5
Tank, l
24
50
Pressure, bar
8
8
Air displacement, l/min
230
230
RPM
2850
2850
Volt/Hz
220/50
220/50
Size, mm
620х280х600
730х320х650
Weight, kg
22
31
The manufacturer reserves himself the right to make the manual's content or function change
without any preliminary notification of the users.
3. Start-up and use
-
-
-
.6
- C
.
-
-
. 3
-
8
Fit the wheels and foot (or the caster wheel for models that are fitted with this) according to the
instructions provided in the packaging. For versions with fixed feet, assemble the front bracket kit or
the vibration-dampers if furnished. Check that the rating data match the effective characteristics of
the system (voltage and power).
Check for correspondence between the compressor plate data with the actual specifications of the
electrical system.Avariation of ± 10% with respect of the rated value is allowed.
Insert the power plug in a suitable socket checking that the button of the pressure switch located on
the compressor is in the “O” (OFF) position (fig
).
heck the oil level using the rod included in the oil fuel plug (fig 7a-7b-7c) or the sight glass (fig. 7d),
and if necessary top up.
At this point, the compressor is ready for use.
Operating on the switch of the pressure switch (fig
), the compressor starts, pumping air in the
reservoir through the delivery hose.
The absence of pressure in the head facilitates subsequent restart. When air is used, the
compressor restarts automatically when the lower calibration value is reached (approx. 2 bar
between upper and lower). The pressure inside the reservoir can be checked on the gauge
provided (fig. ).
- 7 -