Текст страницы
English
DRILL
DCD800
DRILL/HAMMERDRILL
DCD805
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power tool users.
Technical Data
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
DCD800
DCD805
Voltage
VDC
18
18
Type
1
1
Battery type
Li‑Ion
Li‑Ion
No‑load speed
1st gear
min‑1
0–650
0–650
2nd gear
min‑1
0–2000
0–2000
Impact rate
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
1st gear
min‑1
—
0–11050
2nd gear
min‑1
—
0–34000
Max. torque (hard/soft)
Nm
90/27
90/27
Chuck capacity
mm
1.5–13.0
1.5–13.0
Maximum drilling capacity
EC‑Declaration of Conformity
Machinery Directive
Wood
mm
55
55
Metal
mm
13
13
Masonry
mm
—
13
Weight (without battery pack)
kg
1.28
1.34
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
LPA (emission sound pressure level)
dB(A)
74
90
LWA (sound power level)
dB(A)
85
101
K
(uncertainty for the given sound level) dB(A)
5
5
Drilling into metal
Drill/Impact Drill
DCD800, DCD805
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2-1:2018+A11:2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
Vibration emission value ah,D =
m/s2
< 2.5
< 2.5
Uncertainty K =
m/s2
1.5
1.5
Drilling into concrete
Vibration emission value ah,ID =
m/s2
—
11
Uncertainty K =
m/s2
—
1.5
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
30.10.2021
3