Текст страницы
English
z
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Description (Fig. A)
Do not incinerate the battery pack. B
1 Slider switch
2 Lock‑off lever
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
USE (without transport cap). Example: Wh rating indicates 108 Wh (1 battery with 108 Wh). A
3 Spindle lock button
4 Spindle
5 Side handle
6 Backing flange
7 Locking flange
8 Guard
Battery Type
The following tools operate on a 18 volt battery pack: DCG409
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
more information.
9 Guard release lever
10 Battery pack
11 Battery release button
Intended Use
The DCG409 cordless angle grinder has been designed
for professional cutting, grinding, sanding and wire
brush applications.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
This cordless angle grinder is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Features
Package Contents
The package contains:
1 Angle grinder
1 125 mm Guard (Type 27)
1 Side handle
1 Flange set
1 Hex wrench
1 Li‑Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
No‑Volt switch
The No‑volt function stops the grinder restarting without the
switch being cycled if there is a break in the power supply.
a
Read instruction manual before use. g
Electronic Clutch
This unit is equipped with an E‑Clutch™ (Electronic Clutch),
which in the event of a high‑load or wheel pinch, the unit will
be shut off to reduce the reaction torque to the user. The switch
needs to be cycled (turned on and off) to restart tool.
Wear ear protection. f
Visible radiation. Do not stare into light.
Wear eye protection. n
Kickback Brake™
When a pinch, stall, or bind‑up event is sensed, the electronic
brake engages with maximum force to quickly stop the wheel,
reduce the movement of the grinder, and shut the grinder
off. The switch will need to be released then depressed to
restart tool.
Date Code Position (Fig. B)
The date code 19 , which also includes the year of manufacture,
is printed into the housing.
Example:
2020 XX XX
Year and week of Manufacture
Power‑OFF™ Overload Protection
The power supply to the motor will be reduced in case of
motor overload. With continued motor overload, the tool will
shut off. The switch will need to be released then depressed
12