Текст страницы
English
SMALL ANGLE GRINDER DCG409
EC‑Declaration of Conformity
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power tool users.
Technical Data
Machinery Directive o
Cordless Small Angle Grinder
DCG409
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2-3:2011
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
DCG409
Voltage
VDC
18
Type
1
Battery type
Li‑Ion
Max. Power Output
W
1647
Rated speed
min‑1
9000
Wheel diameter
mm
125
Wheel thickness (max)
mm
6
Spindle diameter
M14
Spindle length
mm
21.5
Weight (without battery pack)
kg
1.81
Noise values and/or vibration values (triax vector sum) according to EN60745‑2‑:
LPA (emission sound pressure level)
dB(A)
83
LWA (sound power level)
dB(A)
94
K
(uncertainty for the given sound level)
dB(A)
3
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
Surface grinding
a
Vibration emission value ah,AG =
m/s2
8.3
Uncertainty K =
m/s2
1.5
Disc sanding
Vibration emission value ah,DS =
m/s2
2.6
Uncertainty K =
m/s2
1.5
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given inEN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of fire.
Denotes risk of electric shock.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
WARNING: Read all safety warnings, instructions,
GENERAL POWER TOOL SAFETY WARNINGS
4