Текст страницы
- The power cord of the appliance should not come into contact with the
heating surfaces of the radiator.
- U-shaped holders - 1 pc.
- Screws - 2 pcs.
- User Manual - 1 pc.
out. Leave the appliance in this position. When the temperature in the
room decreases the appliance will turn on automatically and will keep
operating until the temperature returns to the desired level. This will
allow you to maintain an optimal temperature in the room.
- Use the temperature regulator if you wish to change the desired
temperature in the room. Turn the regulator clockwise to increase the
temperature and counterclockwise to reduce it.
- This appliance is equipped with an overheating protection system which
will turn the heater off if it reaches an excessively high temperature.
- In order to turn the heater off set all switches to the O position and
disconnect the appliance from power supply.
2. APPLIANCE DESCRIPTION
- Number of heating segments:
СТ-6230-5, 6232-5 - 5 pcs, СТ-6230-7, 6231-7, 6232-7 - 7 pcs, СТ-6230-
9, 6231-9, 6232-9 - 9 pcs, СТ-6230-11, СТ-6231-11, СТ-6232-11 - 11 pcs
- 3 output levels
- Temperature regulator
- Overheating protection function
- Heating coverage:
СТ-6230-5, 6232-5 - 15 m2, СТ-6230-7, 6231-7, 6232-7 - 20 m2, СТ-6230-9,
6231-9, 6232-9 - 25 m2, СТ-6230-11, 6231-11, 6232-11 - 30 m2
5. MAINTENANCE
- Disconnect the heater from power supply and let it cool down before
cleaning.
- Use a soft dry cloth to remove contamination from the surface of the
appliance.
4. OPERATING PROCEDURE
INSTALLING THE WHEELS
ATTENTION! The appliance may only be used after the feet and wheels
are installed.
- Turn the heater over with the control panel facing downwards. Ensure
that the appliance is stably standing on the floor.
- IInstall the platform with wheels at the bottom of the front panel.
- Fix the platform with screws.
- Install the platform with wheels between the two extreme radiator
sections.
- Insert the U-shaped mount so that it covers the platform and radiator.
- Fix the platform with nuts.
- Set the radiator upright and ensure that it stands stably on the floor.
- Carry handle
- ON/OFF selector switch
- Temperature regulator
- Power cord storage compartment
- Wheels
- Feet
- Heating segments
- Pilot light
ATTENTION!
- Do not submerge the appliance in water!
- Do not allow the appliance to come into contact with water.
- Do not use abrasive cleaning agents.
- Store the appliance in a dry location after coiling up the power cord and
placing tiyt inside the storage compartment.
OPERATION
- Before operating the appliance ensure that it is placed on a smooth
surface.
- Ensure that all switches are in the O position. Plug the power cord into
an electric socket.
- Set the temperature regulator to the Mакс setting and turn the heater on
by choosing one of the following modes: – minimal output, – medium
output, – maximum output.
- When the temperature in the room reaches the desired level, turn
the temperature regulator counterclockwise until the pilot light goes
3. SCOPE OF SUPPLY
- Heater - 1 pc.
- Platform with two wheels - 2 pcs. (for models СT-6230-5, СT-6232-5 the
platform with wheels comes disassembled)
- Wing nut - 2 pcs.
17