Текст страницы
Disassembly and Assembly
4 Set up the main screen removal fixture and verify the power is set to match the rated
input of the power supply and verify the power cable is in good condition, not frayed
or torn. Plug the fixture into wall power using the approved power code for region of
use. Rotate the handle so that the device can be placed on the fixture and adjust the
mounting part according to the length of the device. Put the device on the fixture
with the main screen facing up and rotate the handle so that the device is fully
mounted. Close the cover of the fixture and push the Start button on the front of the
unit, and then check the green LCD is turned on. The main screen is slowly separated
as the cover rises automatically. When the main screen is completely disassembled,
press the Stop button twice and remove the separated screen and the metal frame
from the fixture.
• Keep your hands out of main fixture to avoid mechanical pinching, electrical interconnects and hot surfaces.
• Follow the main screen removal fixture’s instructions.
• Any and all liquids, hazardous, flammable or not, should be kept at a distance.
You need to reuse the separated main screen. Be careful not to damage the screen.
• This fixture is only available to use when purchased for self repair service.
Availability may vary depending on the country and is currently available only in
limited countries.