Инструкция 6.9" Смартфон Samsung Galaxy Z Flip7

Disassembly and Assembly

14 To reattach the disassembled main screen, remove all adhesive and tapes from the inside of the screen using the tweezers and your fingers.

• Before reassembling the main screen, completely remove all remaining tapes from the inside of the screen.

• Be careful not to damage the near components.

15 Check for the reassembly steps of the Main Screen and completely reassemble the
main screen. Repeat the same steps of applying the CIPG adhesive into the 2 bottom
holes. Also, apply the same adhesive to 6 screw positions. Stay in that condition for at
least 90 minutes so that the adhesive is completely dried.

• Before using the adhesive, you must wear protective safety equipments such as glasses, gloves, and a mask for your safety.

• If the adhesive is in contact with the skin, wash it off with clean water immediately.

• Adhesive is not allowed to be used for other purposes.

• Be careful not to get stabbed or injured by needle.

• If the applied adhesives overflows, wipe it carefully with a clean and soft cloth.

• Be careful not to overturn the device or cause external impact for at least 90 minutes while drying the adhesive.

215