Текст страницы
You can connect the switch to a protective ground by
following the steps below:
1. Verify if the system power is off.
2. Place the terminal lug ring of the grounding cable on
top of the ground-screw opening, insert the grounding
screw into it and tighten the screw with a screwdriver.
3. Attach the terminal lug ring at the other end of the
grounding cable to an appropriate grounding stud or
bolt on rack where the switch is installed.
4. Verify if the connections at the ground connector on
the switch and the rack are securely attached.
Step 3 – Plugging in the AC
Power Cord
You can connect the AC power cord into the rear
of the switch and to an electrical outlet (preferably
one that is grounded and surge protected).
ENGLISH
Power Failure
As a precaution, the switch should be unplugged in
case of power failure. When power is resumed, plug
the switch back in.
3