Текст страницы
7
EN
• Insert the power plug into the mains socket, and the
illumination of the «
» On/Off button (8) will light up,
and the air fryer will switch to standby mode.
• Give the seafood program «
» power button (13)
a quick press, the digital symbols (9) will display the
190°C temperature, the temperature value is set by
default, the operation time in this mode is 6 minutes,
also set by default.
• Press the «
» On/Off button (8) again, the air fryer
will switch on.
• If you want to switch the air fryer off earlier, press and
hold the «
» On/Off button (8) for 2 seconds, the air
fryer will switch off , and the air fryer fan will continue
to operate for 60 seconds, it is necessary to cool
down the heating element.
Note: when using the unit for the fi rst time, a foreign
smell or some smoke from the heating elements can
appear - this is normal and it is not covered by warranty.
USING THE AIR FRYER
CAUTION!
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages; if the unit is damaged,
do not plug it into the mains.
• Make sure that the indicated specifi cations of the
power supply voltage of the unit correspond to the
specifi cations of your mains. When the unit is used in
the mains with 60 Hz frequency, it does not need any
additional settings.
• Install and use the air fryer on a fl at, dry, steady and
heat-resistant surface with free access to the mains
socket.
• Clean the air fryer body (5) with a slightly damp cloth
and then wipe it dry.
• Take the handle (1) and remove the tray (7) with the
grid (6).
• Remove the grid (6).
• Wash the grid (6) with warm water and neutral
detergent, rinse it and wipe dry.
• Clean the tray (7) from the outside and inside with a
slightly damp cloth and then wipe it dry.
• Install the grid (6) in the tray (7).
• Install the tray (7) with the grid (6) in the air fryer.
Note: if the tray is not fi xed in the air fryer body, the air
fryer will not switch on, always make sure that the tray (7)
is installed properly.
• Switching the air fryer on for the fi rst time
• To remove any foreign smells, switch the air fryer on
without products.
-
The air fryer is not intended for boiling water.
-
While the air fryer is operating, the hot air and
steam will and hot steam will come out of the
grid (4). Use appropriate precautions to prevent
the risk of burns, fi res or other personal injury or
property damage.
-
The air fryer heats up during operation and retains
heat for some time after it is switched off . Always