Текст страницы
7
EN
Note: Be careful when handling the glass tray (2).
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Place the grid (3) into the tray (2) (Fig. 1).
• Install the tray (2) with the grid (3) in its installation
place (6) (Fig. 2).
Note: if the tray (2) is not fixed in the air fryer body, the
air fryer will not switch on, always make sure that the
tray (2) is installed properly.
Switching the air fryer on for the first time
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not need
any additional measures.
• Install and use the air fryer on a level, dry, stable,
heat-resistant surface with easy access to an electrical
outlet.
• Wipe the surface of the air fryer body (5) with a slightly
damp cloth, then wipe dry.
• Grasp the handle (1) and pull out the tray (2) with the
grill (3) (Fig.1).
• Pull out the grill (3).
• Wash the grill (3) with warm water and neutral
detergent, rinse, then wipe dry.
• Clean the tray inside and out with a slightly damp cloth,
then wipe dry.
• To remove foreign odors, it is recommended to switch
the air fryer on without loading food.
• Insert the power plug into the mains socket.
• Press the on/off button (7) «
», the air fryer will turn
on and all indicators will light up.
• Press the button (17) «
», by pressing the buttons
(11) «+/-», set the air fryer operating temperature to
200°C, the temperature will be displayed by digital
symbols (8) and the symbol (9) «°C».
• Press the button (17) «
» again, by pressing the
buttons (11) «+/-», set the operating time of the
air fryer to 10 minutes, the operating time will be
displayed by digital symbols (15) and the symbol (14)
«min».
• To switch on the air fryer, press the start/pause
button (12) «
»; the digital symbols (8 and 15) will
show the temperature and operating time of the air
fryer.
• If you need to stop the air fryer, press the button (12)
«
», to continue operation, press the button (12)
«
» again.