Текст страницы
7
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Remove the grid (2).
• Take hold of the handle (6) and remove the lower
bowl (7) with the grid (5).
• Remove the grid (5).
• Wash the grids (2, 5) with warm water and neutral
detergent, rinse them and wipe dry.
• Wipe the bowls (3, 7) outside and inside with a
slightly damp cloth, then wipe dry.
• Place the grids (2, 5) into the bowls (3, 7).
• Place the bowls (3, 7) with the grids (2, 5) in their
place of installation.
Note: If the bowls (3, 7) are not fixed in the air grill body
(8), the air grill will not be switched on. Always check
that the bowls (3, 7) are installed correctly.
SWITCHING THE AIR GRILL ON FOR THE FIRST
TIME
• In order to remove foreign smells, it is recommended
to switch the air fryer on without loading food.
• Insert the power plug into the mains socket, you will
hear a sound signal and the on/off/pause button (21)
«
» indicator will light up.
• For a short time press the on/off/pause button (21) «
», the digital symbols (13, 16) will show «----».
• Press the button (11) « 1 » to select the upper bowl
(3), and the digital symbols (13) will display the
default settings, temperature «180»°C and time «15»
minutes.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional measures.
• Install and use the air fryer on a level, dry, stable,
heat-resistant surface with easy access to an
electrical outlet.
• Wipe the air grill body (8 ) with a slightly damp cloth
and then wipe it dry.
• Take hold of the handle (4) and remove the upper
bowl (3) with the grid (2).