Текст страницы
7
EN
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES
BEFORE THE FIRST USE
After unit transportation or storage at negative
temperature, unpack it and wait for 3 hours before
using.
• Remove the grid (9).
• Take the handle (6) and remove the basket (2) with
the grid (9).
• Remove the grid (9).
• Wash the grids (9) with warm water and neutral
detergent, rinse them and wipe dry.
• Wipe the baskets (1, 2) outside and inside with a
slightly damp cloth, then wipe dry.
• Place the grids (9) into the baskets (1, 2).
• Place the baskets (1, 2) with the grids (6, 9) in their
place of installation.
Note: if the baskets (1, 2) are not fixed in the air fryer
body (7), the air fryer will not be switched on. Always
check that the baskets (1, 2) are installed correctly.
SWITCHING THE AIR GRILL ON FOR THE FIRST
TIME
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the indicated specifications of the
power supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional measures.
• Install and use the air fryer on a level, dry, stable,
heat-resistant surface with easy access to an
electrical outlet.
• Wipe the air grill body (1) with a slightly damp cloth
and then wipe it dry.
• Take the handle (4) and remove the basket (1) with
the grid (9).
• In order to remove foreign odors, it is recommended
to switch on the air fryer without loading food.
• Insert the power plug into the mains socket, and the
on/off button (11) indicator «
» will light up, and the
air fryer will switch to standby mode.
• Press the on/off button (11) «
», all symbols on the
control panel (8) will light up, the basket (1) selection
button (28) « » will flash, the digital symbols (21, 26)
will display the default settings, temperature «180»
°C and time «15» minutes. The symbols (13) « »,
(15) «
», (24) «
» confirm the set temperature.
The symbols (13) «
», (15) «
», (24) «
»
confirm the set time.