Текст страницы
Setting the Temperature and Cooking Time
There are 2 buttons
and
on the appliance.
• Use the
or
button above and below the sym-
bol to set the temperature (80 – 200 °C). However, with
the automatic programme
(keep warm / defrost), the
temperature can only be set from 60 – 90 °C.
• Use the
or
button above and below the
symbol to set the cooking time (1 – 60 minutes). However,
with the automatic
programme (keep warm / defrost),
the cooking time can be set from 1 – 120 minutes.
• The display alternates between the temperature and the
cooking time.
Automatic Programmes
Mode
Pre-set
temperature in °C
Pre-set time
in minutes
9. After the time has elapsed, the appliance will automat-
ically switch into standby mode. The fan keeps running
to cool down the appliance. After approx. 15 seconds,
5 signal tones sound.
10. Pull the frying container out of the appliance by the
handle.
11. Place the frying container on a heat-resistant surface.
12. Fill the frying container with the desired food.
13. Push the frying container back into the appliance.
14. Press the
button again to exit standby mode.
15. Select an automatic programme or set the cooking
time and temperature individually using the
or
buttons.
16. Press the
button to start the cooking process.
17. If necessary, shake the food halfway through the
cooking time. To do this, pull out the frying container by
the handle.
18. Push the frying container back into the appliance.
French fries
200
20
Chicken leg
180
25
Shrimps
160
20
Cake
160
25
Steak
160
20
Fish
180
20
Interrupt Use
• Operation is interrupted when you pull out the frying
container. Put the frying container back in to resume
operation.
• The appliance will start from the spot it has been paused.
If, however, you pull out the power plug, your current
settings will be lost. When inserting the power plug
and pressing the
button the appliance will show the
pre-adjustment again.
Ribs
180
15
Keep warm /
defrost
90
120
• These shall be considered as guide values. Depending
on the size and weight, the time and temperature may be
longer and higher or shorter and lower.
• Also observe the information on the food packaging.
• You can also adjust the pre-set temperature and cooking
time of the automatic programmes.
End of Use
1. After the time has elapsed, the appliance will automat-
ically switch into standby mode. The fan keeps running
to cool down the appliance. After approx. 15 seconds,
5 signal tones sound.
2. You can also end operation prematurely by pressing the
Using the Appliance
button.
3. Pull out the frying container by the handle.
4. Put the food in a heat-resistant bowl.
5. Push the frying container back into the appliance.
1. Make sure that the appliance is disconnected from the
mains.
2. Pull the frying container out of the appliance by the
handle.
3. If necessary, place the sieve insert with the silicone
nubs in the appliance. Push the sieve insert all the way
down.
4. Push the frying container back into the appliance. It
must lock into place.
5. Plug the appliance into a properly installed earthed
socket. A beep sounds and all symbols light up briefly.
The
button lights up.
6. Press the
button to exit standby mode. The appliance
is pre-set to 185 °C and 15 minutes.
7. We recommend preheating the appliance for about
3 minutes. To do this, use the
or
buttons to set
the required temperature and cooking time to 3 minutes.
8. Press the
button to start the cooking process.
11
PC-FR1239H_IM
09.05.22