Текст страницы
Outdoor Unit Installation
DO NOT install unit in the following locations:
Install the unit by following local codes and
regulations , there may be differ slightly
between different regions.
e
v
o
b
a
)
n
i
4
2
(
m
c
0
6
30cm (12in)
from back wall
Installation
Near an obstacle that will block air inlets
and outlets
Near a public street, crowded areas, or
where noise from the unit will disturb others
Near animals or plants that will be harmed
by hot air discharge
Near any source of combustible gas
In a location that is exposed to large
amounts of dust
In a location exposed to a excessive amounts
of salty air
60cm (24in)
on right
30cm (12in)
on left
200cm (79in)
in front
Installation Instructions – Outdoor unit
SPECIAL CONSIDERATIONS FOR EXTREME
WEATHER
If the unit is exposed to heavy wind:
Install unit so that air outlet fan is at a 90°
angle to the direction of the wind. If needed,
build a barrier in front of the unit to protect it
from extremely heavy winds.
See Figures below.
Strong wind
Wind Baffle
Step 1: Select installation location
Before installing the outdoor unit, you must
choose an appropriate location. The following are
standards that will help you choose an appropriate
location for the unit.
Strong
wind
Proper installation locations meet the
following standards:
Strong wind
Meets all spatial requirements shown in
Installation Space Requirements above.
Good air circulation and ventilation
Firm and solid—the location can support the
unit and will not vibrate
Noise from the unit will not disturb others
Protected from prolonged periods of direct
sunlight or rain
If the unit is frequently exposed to heavy
rain or snow:
Build a shelter above the unit to protect
it from the rain or snow. Be careful not to
obstruct air flow around the unit.
If the unit is frequently exposed to salty air
(seaside):
Use outdoor unit that is specially designed to
resist corrosion.
Where snowfall is anticipated, take
appropriate measures to prevent ice
buildup and coil damage.
Outdoor Unit
Installation
Page 25