Текст страницы
KENWOOD Remote Application
Bluetooth®
3 Repeat step 2 until the desired item is selected/activated.
4 Press and hold
to exit.
To return to the previous setting item, press
.
Default: [XX]
• Depending on the Bluetooth version, operating system and the firmware
version of your mobile phone, Bluetooth features may not work with this
unit.
• Be sure to turn on the Bluetooth function of the device to make the
following operations.
• Signal conditions vary depending on the surroundings.
[REMOTE APP]
Bluetooth — Connection
[SELECT]
(For
)
Selects the device ([IOS] or [ANDROID]) to use the application.
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
[IOS]
[YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/
iPod touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via
the USB input terminal.
– You change from iPod USB source to iPod BT source.
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC) (only for
)
[ANDROID]
[YES]: Selects Android device to use the application via Bluetooth. ;
[NO]: Cancels.
Connect the microphone
Rear panel
[ANDROID LIST]
Selects the Android device to use from the list.
•
: Displayed only when [ANDROID] of [SELECT] is set to
[YES].
Microphone
(supplied)
Microphone
input jack
Secure using cord
clamps (not supplied)
if necessary.
Adjust the
microphone angle
[STATUS]
Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]: No iOS device is connected to use the application.
[ANDROID CONNECTED]: You are able to use the application using the
Android device connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is connected to use the
application.
ENGLISH
13