Текст страницы
Installation/Connection
Installing the unit (in-dash mounting)
Installing the unit (without mounting sleeve)
1 Remove the mounting sleeve and trim plate from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the
unit.
Do the required wiring.
(Page 28)
Removing the unit
1 Detach the faceplate.
2 Remove the trim plate.
3 Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
Hook on the top side
Dashboard of your car
Orientate the trim
plate as illustrated
before fitting.
Bend the appropriate tabs to hold the sleeve
firmly in place.
ENGLISH
27