Текст страницы
Hereby, Sony Corporation declares
that this equipment is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration
of conformity is available at the
following internet address:
https://www.compliance.sony.eu
Hereby, Sony Corporation declares
that this equipment is in compliance
with the UK relevant statutory
requirements.
The full text of the declaration
of conformity is available at the
following internet address:
https://compliance.sony.co.uk
EN
Important note on use of 5 GHz
wireless LAN
Compliance with FCC requirement
15.407(c)
Data transmission is always initiated
by software, which is the passed
down through the MAC, through the
digital and analog baseband, and
finally to the RF chip. Several special
packets are initiated by the MAC.
These are the only ways the digital
baseband portion will turn on the RF
transmitter, which it then turns off
at the end of the packet. Therefore,
the transmitter will be on only while
one of the aforementioned packets
is being transmitted. In other words,
this device automatically discontinue
transmission in case of either
absence of information to transmit or
operational failure.
Frequency Tolerance: ±20 ppm
For this radio equipment the following
restrictions on putting into service or
of requirements for authorization of
use apply in AT/BE/BG/CY/CZ/DK/
EE/FI/FR/DE/EL/HU/IE/IT/LV/LT/LU/
MT/NL/PL/PT/RO/SK/SI/ES/SE/UK/
UK(NI)/HR/IS/LI/NO/CH/AL/BA/MK/
MD/RS/ME/XK/TR:
5 150 - 5 350 MHz band is restricted to
indoor operations only.
For Customers in Canada
The power delivered by the charger
must be between min 2.5 Watts
required by the radio equipment, and
max 27 Watts in order to achieve the
maximum charging speed.
USB PD fast charging
5 150-5 350 MHz band is restricted
to indoor operation only.
High-power radars are allocated
as primary users (i.e. priority users)
of the bands 5 250-5 350 MHz and
5 650-5 850 MHz and that these
radars could cause interference and/
or damage to LE-LAN devices.
For Customers in Europe
2 400 MHz < 60 mW e.i.r.p.
Deactivating the power management
function will increase the energy
consumption of the product.
IEEE802.11
b/g/n
< 35 mW e.i.r.p.
IEEE802.11
a/n/ac
5 150 -
5 350 MHz
5 470 -
5 725 MHz
< 25 mW e.i.r.p.
IEEE802.11
a/n/ac
5 725 -
5 850 MHz
Bluetooth 2 400 MHz < 10 mW e.i.r.p.
EN
11