Инструкция блендер погружной Centek CT-1311

1. Motor unit
2. Blender nozzle
3. Connector (mixer)
4. Whipping nozzles
5. Kneading nozzles
6. Cappuccino machine nozzle
7. Chopper cover
8. Chopper Bowl
9. Chopper knife
10. Measuring cup

- Remove bones, sinews and gristle from meat.
1. Install the blade in the chopper bowl center mount and fix it in place.
2. Place the ingredients (max. 250 g) in the bowl.
3. Install the chopper lid.
4. Insert the blender housing into the coupling and ensure that it is properly
engaged.
5. Press the TURBO mode button to activate the unit.
6. After use, press the attachment release button to disconnect the blender
unit from the chopper bowl.
7. Turn the lid counterclockwise to disconnect it and lift it up.
8. Remove the blade by gently turning and lifting it.

HAND MIXER
Suitable for whipping soft ingredients such as egg whites, cream, batters,
eggs, and sugar.
NOTE:
Do not try to whisk harder mixtures than margarine as you may damage
the balloon whisk.
Do not whisk more than 6 egg whites or 1000 ml of cream at the same time.

• SCOPE OF SUPPLY AND CONTROLS
• Blender - 1 pc.
• Blender nozzle - 1 pc.
• Measuring cup (800 ml) - 1 pc.
• Whisk attachment - 2 pcs.
• Nozzle-hook - 2 pcs.
• Cappuccino maker - 1 pc.
• Chopper assembly (650 ml) - 1 pc.
• Instruction manual - 1 pc.

MILK FROTHER
Best in transforming milk into thick and silky foam and microfoam.
CAUTION!
If you have long hair, ensure to keep it away from the whisk and tie it
up neatly to ensure they do not get caught in between the whisk when
operating.

4. OPERATING PROCEDURE
PREPARATION
Before connecting the appliance to power supply ensure that the power
grid voltage correspond to that indicated on the appliance.
Remove all packaging materials. Clean the attachment (see MAINTENANCE
Section).

12. Only the use of original spare parts is allowed. Do not use accessories
which are not included in the scope of supply.
13. Ensure that the power supply grid voltage corresponds to the one indicated
on the appliance before operating it.
14. Before turning the appliance on ensure that it is fully and correctly
assembled.
15. Do not pull the power cable if it touches sharp edges, is jammed by any
objects or entangled; avoid contact of the power cable with hot surfaces.
16. In case of unskilled intervention into the appliance or non-observance
of the operating requirements listed in the present manual the warranty
becomes void.
17. Connect the appliance only to power grid sockets equipped with earthing
contacts, use only two-pole extension cables with 10A rating and an
earthing conductor.
18. Do not use multiple high-power appliances simultaneously – this may
lead to malfunctions in residential power supply systems.
19. The appliance should only be disassembled after the motor has come
to a complete stop.
20. Do not use the appliance if:
• the power cord is damaged;
• the appliance has visible damage;
• the appliance has been dropped from height;
• the appliance has been exposed to moisture.
21. Ensure the appliance is turned off when not in use!
22. Do not operate the appliance at temperatures below 0 °С and above
35 °С. If the appliance has been exposed to temperatures below 0 °С for
a prolonged time, place it in a heated environment for at least 3 hours
before turning it on.
23. Pull the plug from the power socket if: the appliance does not work
correctly (unusual noise, vibration, etc.); before disassembly/reassembly;
after each use. Disconnect the appliance from power supply if You have
to leave it unattended for even a short time.
24. Packaging materials can be potentially dangerous to children and should
be stored in a specially designated location.
25. Special instructions for transportation (shipment) and sale: none.
26. Should You decide to transfer the appliance to another person, please
pass the present manual over along with it.

HAND-HELD BLENDER
The blender is designed for mixing liquids (e.g. mixing diary foods, sauces,
fruit juices, soups, drinks and cocktails) and soft ingredients (e.g. purees,
baby food ingredients, etc.).
1. Install the blender attachment and connect the appliance to power supply.
2. Fully submerge the cutting disc guard into the glass.
3. Press the main mode button or the TURBO button to turn the appliance on.
4. Slowly move the appliance up and down and in circles to uniformly
blend all ingredients.

ATTENTION! Electric shock hazard! Never submerge the appliance in water!
ATTENTION! Fire hazard! Avoid all contact of the appliance with flammable
liquids and combustible materials!

5. MAINTENANCE
ATTENTION!
- Carefully remove all attachments.
- Use a slightly damp cloth to wipe the motor and gear units of the blender,
then wipe them dry.
- After processing salty and sour foods immediately rinse the used
attachments with water.
- When processing highly staining foods (e.g. carrots or beets) the
attachments and vessels may become stained; wipe them with fabric
dampened in vegetable oil, then rinse with water.
- Wash the attachments, measuring cup, bowl with warm water, rinse
and let dry.
- Place the shredding blade into the bowl, put the plastic cap on the blade.
Never submerge the motor and gear units in water or any other liquids,
wash them under a jet of water or place in a dishwasher.
Clean the appliance before putting it away for prolonged storage.
- Do not wind the power cord around the motor unit.
- Store the blender set in a cool dry place, out of reach of children.

CHOPPER
The chopper is designed for chopping meat, cheese, onions, herbs, garlic,
carrots, walnuts, hazel nuts, almonds, etc. Use the TURBO button to chop
hard foods.
Do not try to chop overly hard materials such as nutmeg, coffee beans or cereals.
Before using the chopper:
- Cut the food into small pieces;
- Remove stalks from herbs and the shells from nuts;

1. APPLIANCE DESCRIPTION
2. Smooth power control
3. Power button
4. TURBO mode button

13