Текст страницы
Set proper accessory. USING THE DEVICE
I.
USING BLENDER
Set blender accessory on the motor unit and turn it clockwise.
Place the accessory in the cup with the product, hold the handle.
Connect the device to the mains.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
Move blender in the cup in a circular motion for proper grinding.
Don’t put blender in water over the line of attachment blender and motor unit.
In case cutting blades are blocked, turn off device & unplug the appliance from the mains.
After use, turn off device, remove blender from the mains and disconnect the accessory.
ATTENTION! Do not use the appliance to prepare firm dough (rolls, breads, etc.). If you use the device for mixing thick products, it may malfunction due to overload of the engine. Don't grind
very hard foods such as ice, nuts, coffee beans.
ATTENTION! The temperature of the treated mixture should not exceed 80°C.
ATTENTION! The duration of continuous operation with the blender, whisk should not exceed 50 seconds, for the shredding of products in the chopper the duration should not exceed 20-30
seconds. Make a break between work cycles for at least 4 minutes.
II. USING WHISK
Fix handle on the upper part of the whisk.
Fix the upper part of the whisk on the motor unit.
Place product inside of the cup.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
After use, turn off device, remove blender from the mains and disconnect the whisk.
III. USING CHOPPER
Fix chopper blades inside of the chopper cup, add products.
Place the cover and motor block and fix it tight.
Connect the device to the mains.
Push ON/OFF button (2) to start blending. Use the controller (1) to set the desired operating speed. When pressing and holding the button (3), the device will operate at maximum speed.
After use, turn off device by pressing on/off button, remove blender from the mains and disconnect the chopper.
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance.
Use wet cloth to clean the motor block. Do not immerse the appliance in water or other liquids.
Clean accessories in soapy water and dry.
Do not use chemical and abrasive cleaners for cleaning.
Recommended to clean the device right after operating to avoid coloring of plastic parts.
6