Текст страницы
2. Test your Seasonic PSU before installation
2.1. Plug the AC power cord into the PSU.
Make sure that the AC power is coming
directly from the wall outlet.
It is recommended to use a high quality surge
protector to protect the PSU and the system.
2.2. Connect both the 18-pin and 10-pin
connectors of the motherboard cable to
the PSU.
2.3. If your power supply features a fan
control switch, set it to “Normal” Mode*.
* In Hybrid or Fanless Mode (S³FC) the fan will not turn.
Power Supply Tester
10-pin Connector
18-pin Connector
2.4. If you have a Power Supply
Tester**, attach it to the 24-pin
motherboard connector. There
is a notch on the Tester that
helps to make a perfect fit with
the 24-pin connector.
** If you do not have a power supply
tester, refer to the paper clip method
described below.
2.5. (Optional) For testing a Fanless PSU
or a PSU without the fan control switch,
attach an external fan or LED light using
a Molex cable to the PSU.
Paper clip method
2.6. Turn on the power supply by setting
the I/O switch to the “I” (ON) position.
Use a paper clip or a
piece of wire to create
a short circuit on the
24-pin motherboard
connector by
connecting the pins
shown on the
illustration.
If the power supply fan starts spinning
(or the externally attached LED light
turns on), then your PSU is working.
The drawings illustrate a fully modular PSU with a fan control switch and a Power Supply Tester; the features and
accessories of your PSU might be different.