Текст страницы
7
EN
MOTOR OVERHEATING PROTECTION
• In case of overheating of the motor, the automatic
thermal switch will be on, and the meat grinder will be
switched off.
• Switch the meat grinder off by pushing “O” button and
unplug it.
• Let the meat grinder cool down for approximately 40-60
minutes (the electric motor cooling down time depends
on the air temperature in the room).
• Insert the power plug into the mains socket and switch
the meat grinder on by pressing the «ON» button. If the
meat grinders doesn’t switch on, it may mean that there
are other damages in the unit. In this case apply to the
service center for testing or repairing the meat grinder.
• To avoid overheating of the electric motor, do not
overload the meat grinder and do not apply excessive
effort when pushing meat or other products.
CLEANING AND CARE
• The fine cutting plate (10) can be used for processing
both raw and cooked meat, fish, etc.
• The coarse cutting plate (11) can be used for
processing raw meat, fish, vegetables, dried fruit,
cheese, etc.
• Install the food tray (6) on the meat grinder head (7).
• Insert the power plug into the mains socket.
• Switch the meat grinder on by setting the operation
mode switch (1) to the position «ON».
• Recommendations:
-
Defrost frozen meat thoroughly. For better
processing, cut meat into strips (20x20x60 mm) or
cubes (20x20x20 mm).
-
During operation, use only the pusher (5) supplied
with the unit. Do not apply excessive effort while
pushing the meat or other products.
-
Do not push meat with your hands or any other
objects.
• After the operation is finished, switch the meat grinder
O by setting the operation mode switch (1) to the
position «O», unplug the unit and then disassemble it.
• To disassemble the meat grinder head (7), unscrew
the nut (11) by turning it counterclockwise, remove the
installed plate (10) from the meat grinder head (7) body,
remove the crossed blade (9) and the screw (8).
• To remove the meat grinder head (7), press the lock
button (3), turn the meat grinder head (7) clockwise and
remove it.
• After the operation is finished, switch the meat grinder O
by setting the operation mode switch (1) to the position
«O», unplug the unit and then disassemble it.
• Wash all the removable parts which were used for
operation with warm water and neutral detergent, rinse
and dry.
• Wipe the meat grinder body with a slightly damp cloth
and then wipe it dry.
• Do not use any solvents or abrasives to clean the meat
grinder body.
• Provide that no liquid gets inside the meat grinder body.