Текст страницы
9
EN
• Avoid exposing the receiver to direct sunlight,
otherwise false activation of control commands is
possible.
USING THE FAN
• To turn the fan on, press the «
» button (8) on the
Control Panel (4) or the «
» button (18) on the
Remote Control (22), you will hear a sound signal and
the fan will turn on at the medium airflow speed (13);
the digital «2» symbol will turn on.
• After a while the numeric indication of the room
temperature will appear on the Display (13).
Note: the temperature digital indications (18) may
be slightly different from the readings of another
thermometer.
• Use the handle (5) to carry the fan.
• Place the fan base (1) on a flat, dry and steady
surface.
• Do not place the fanon soft surfaces, such as carpets
with high pile, sofas or beds.
• Insert the Power Cable (7) plug into the mains, you
will hear a sound signal, the Power Indicator (9) «
» and the Room Temperature Indicator (14) «
» will turn on, and numeric indication of the room
temperature will appear on the Display (13).
Switching the fan on/off and selecting the airflow
speed
Notes:
• Pressing the button (15) «
» on the control panel (4)
or the button (19) «
» on the remote control (22) you
can select the airflow speed, the symbols «1-2-3» will
appear on the display (13).
• To turn on the fan, press the «
» button (8) on the
Control Panel (4) and the «
» button (18) on the
Remote Control (22), the fan will turn on, the (9) « »
and (14) «
» indicators will turn on and the numeric
indication of the room temperature will appear on the
Display (13).
Fan operation time timer
• To set the operating time of the fan, press the «
»
button (12) on the Control Panel (4) or the «
» button
(20) on the Remote Control (22) button you will hear
a sound signal, the « » indicator (11) will turn on, and
-
the buttons on the control panel (4) are sensory,
you just need to touch the button to switch the
necessary operation mode on;
-
each pressing of buttons on the control panel (4)
or on the remote control (22) is accompanied with
a sound signal;
-
if no buttons have been pressed, in 10 minutes
the Display (13) backlight will turn off, as well as
the Room Temperature Indicator (14) «
», the
Current Mode Indicators (11 or 16), and the Power
Indicator (9) « ».