Текст страницы
7
EN
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the specified power supply parameters
of the unit match the parameters of the mains. When
using the unit in the mains with 60 Hz frequency, no
additional measures are required.
• Install and use the air fryer on a level, dry, stable,
heat-resistant surface with easy access to an electrical
outlet.
• Wipe the surface of the air fryer body (6) with a slightly
damp cloth, then wipe dry.
• Grasp the handle (1) and pull out the tray (2) with the
grill (3).
• Pull out the grill (3).
• Wash the grill (3) with warm water and neutral
detergent, rinse, then wipe dry.
• Clean the tray (2) inside and out with a slightly damp
cloth, then wipe dry.
• Install the grill (3) into the tray (2).
• Place the drip tray (2) with the grid (3) into the air fryer.
• Insert the power cord plug (8) into the mains socket,
the on/off button (16) « » will light up, and the air
fryer will go into standby mode.
• To set the temperature, press the button (15) «
», by pressing the buttons (13 or 18) «+/-» set
the temperature to 200°С, the temperature will be
displayed by digital symbols (9) and the symbol (14)
«°С».
• To set the operating time, press the button (15) «
»,
by pressing the buttons (13 or 18) «+/-» set the time
to 10 minutes, the operating time will be displayed by
digital symbols (9) and the symbol (17) «min».
• Switch the air fryer on by pressing the button (12) «
».
• If you want to switch the air fryer off earlier, press and
hold the on/off button (16) « » for 3 seconds, in this
case, the heating element will be switched off, the fan
will continue to work for another 30 seconds, then a
beep will sound and the air fryer will go into standby
mode.
Note: when using the unit for the first time, a foreign
smell or some smoke from the heating element can
appear — this is normal and it is not covered by
warranty.
USING THE AIR FRYER
Note: if the drip tray is not fixed in the air fryer body, the
air fryer will not switch on; always make sure that the drip
tray (2) is installed properly.
CAUTION!
Switching the air fryer on for the first time
-
The air fryer is not intended for water boiling.
• In order to remove foreign odors, it is recommended to
switch the air fryer on without loading food.