Текст страницы
Since bends and elbows in the aluminium pipe will cause reductions in air sucti-
on power, excessive elbows and bends should be avoided as much as possible.
(See Figure 3-4)
Carefully place the outer chimney and the inner chimney on top of the product.
Fasten the inner chimney to the inner chimney connection plate with 2 screws.
Figure 4
Figure 3
Figure 2
Outer chimney installation
Fasten the outer chimney to the hood with 2 screws as shown in Figure 5.
Installing the Inner Chimney Hanger Plate
To secure the inner chimney plate to the wall, drill 2 Ø 6 mm holes at the
appropriate height and locations. 6 dowels are driven into these holes and the
inner chimney hanger plate is fixed. At the end of the hood installation, the
inner chimney is screwed to the inner chimney hanger plate at the appropriate
locations. (See Figure 6)
Figure 5
Figure 6
25