Текст страницы
5 Cleaning and maintenance
Carbon filter (Using without flue)
Prior to cleaning and maintenance, unplug the ap-
pliance or turn the main switch off or loosen the
fuse that supplies the hood.
5.1 Aluminum filter
This filter removes the cooking odours. If it is not
possible to use a flue, it purifies the air which is
circulated inside the kitchen. Carbon filter of your
appliance will get clogged in time depending on
the frequency of use, style of cooking and regular
cleaning of the aluminum filters.
A
Caution!
Carbon filter should never be
washed.
This filter captures oil particles in the air. You are
recommended to clean your filter every month
under normal usage conditions. First remove the
aluminum filters for this process. Wash the filters
with liquid detergent and rinse them with water
and install them back after they get dry. Aluminum
filters may get discolored as they are washed; this
is normal and you don't need to change your filter.
You may obtain carbon filters from Beko
Authorised Service Agents.
5.2.1 Replacing the carbon filter
5.1.1 Removing the aluminum
filters
• Remove the aluminum filters. (Figure 10)
• To remove carbon filter, turn the tabs counter-
clockwise and release the filter. (Figure 11)
• Install the new carbon filter.
• Install the aluminum filters.
1. Push the aluminum filter lock forward.
2. Then, slightly lower it and pull forward.
Otherwise, you may bend the filter. (Figure 10)
After the aluminum filter is washed and dried,
reinstall the filter to its slot by applying above
steps in reverse order.
(Figure 11)
Anti-odor filters contain charcoal (active carbon).
(Figure 10)
They must be changed with periods of approxi-
mately 6 months.
Note:
Regardless of using a carbon filter or not, alumi-
num filters must always be installed.
You can also wash aluminum filters in dishwasher.
Do not operate your appliance without the alu-
minum filter in place. Using with carbon filter will
decrease suction performance of the appliance.
17 / EN
Hood / User Manual