Текст страницы
1 Important instructions for safety and environment
This section contains safety in-
structions that will help protect
from risk of personal injury or prop-
erty damage. All warranties will be-
come void if you do not follow these
instructions.
• If the power cable is damaged, it
must be replaced by the manufac-
turer, after sales service or a sim-
ilarly qualified person (preferably
an electrician) or someone desig-
nated by the importer in order to
avoid possible risks.
1.1 General safety
• Operating voltage is 220 to 240
volts.
• If the appliance has a failure, it
should not be operated unless
it is repaired by the Authorised
Service Agent. There is the risk of
electric shock!
• Always have the installation and
repairing procedures carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorised persons.
• Do not route power cable close to
hobs. Otherwise power cable may
cause fire since it melts down eas-
ily.
• Never plug the hood before instal-
lation is completed.
• This appliance is not intended for
use by persons (including chil-
dren) with reduced physical, sen-
sory or mental capabilities, or lack
of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.
1.1.1 Electrical safety
• In order to obtain the best perfor-
mance, external conductor must
not be longer than 4 m. It must not
contain more than 2 perpendicu-
lar (90°) angles and its diameter
must be min. ø120 mm.
• Disconnect the product from the
mains during installation, main-
tenance, cleaning and repairing
procedures.
• Disconnect the appliance before
any intervention to the internal
parts of the appliance.
Hood / User Manual
4 / EN