Текст страницы
3.如下画面表示VIA软件安装完成并成功连接.
欢迎您选购CIDOO QK61 QMK机械键盘，希望您使用愉快， 功能操作说明
请参以下内容。
请将USB线插入到你的电脑设备中，模式切换拨动开关在中间即为有线模式，
键盘背光灯亮起并变为默认的RGB灯效，则表示连接成功。
蓝牙配对方法:
键盘中间拨动开关拨动到左边（靠近USB接口处）即为蓝牙模式：
请按照以下步骤将键盘和您的设备来进行蓝牙配对
当键盘的电池电量低时（电池电量小于3.4V）FN键会持续闪烁红灯，提醒键
盘需要充电
按下FN+ 右SHIFT可查询电量及充电状态，按下后键盘1！至0）亮起，分别代
表10%到100% 电量，如右SHIFT键显示红灯，代表键盘正在充电，如右SHIFT
键回到当前默认灯效，则代表键盘已充满电或未充电，松开FN+ 右SHIFT即可
退出查询模式.
层1：当你使用键盘连接到Win/Mac系统设备时，长按MO(1)按键层1将被激
活使用
60% QMK Tripple Modes Mechanical Keyboard
灯光设置按键
FN+ .> : 背光灯效亮度增加 FN+ ,< : 背光灯效亮度减小
FN+ ;: : 背光灯效色相减 FN+ ’” : 背光灯效色相加
FN+ [{ : 背光灯效速度减小 FN+ ]} : 背光灯效速度增加
FN+BACKSPACE:关闭/开启背光灯 FN+\|:切换背光灯效
FN+V: 背光灯饱和度加 FN+C: 背光灯饱和度减
FN+Z :切换LOGO灯灯效 FN+X:切换LOGO灯颜色
FN+ space: 长按FN+ space三秒键盘恢复到出厂设置
层2：当你使用键盘连接到Win/Mac系统设备时，通过VIA改键设置任意按键
为MO(2)保存后，长按MO(2)按键层2将被激活使用
自定义设置
CIDOO QK61支持QMK/VIA 程序改键布局
注意：请确保您的键盘已正确插入电脑设备
VIA 安装步骤如下:
1.请访问https://github.com/WestBerryVIA/via-releases/releases选择您
需要的最新的VIA软件然后下载并安装在电脑上 .如下图
如果VIA软件无法识别您的键盘，请联系我们的客服人员寻求帮助
如果您的键盘已经插入VIA会自动检测你的键盘是否兼容。键盘记忆是持久的，
这意味着无论你在哪里插入键盘，它都会记住设置。
在VIA软件页面上半部分，鼠标点击选择你想要更改的按键，然后再用鼠标点
击VIA软件页面下半部分中你想要更改的按键，该按键功能生效.
更多设置板块请见以下说明：
1.CIDOO QK61蓝牙键盘最多可同时连接3个蓝牙设备. 打开键盘电源 . (靠近
USB接口处为 蓝牙模式) .按住 FN + Q 或者按住 FN + W 或者按住FN + E 3-5
秒. 当Q或者W或者E 开始快速闪烁，表示键盘在可连接状态.
2.在要连接的设备上打开蓝牙，搜索并选择其中一组FN + Q对应设备名
CIDOO QK61-1，FN + W对应设备名CIDOO QK61-2，FN + E对应设备名
CIDOO QK61-3，点击连接配对
3.键盘与你的设备连接成功后，Q键或者W键或者E键会停止闪烁，短按FN+Q
或者FN+W或者FN+E键切换已经配对好的蓝牙设备。
关闭键盘电源开关蓝牙断开，重新打开电源开关，CIDOO QK61会默认回连到
蓝牙断开前使用的设备
层3：当你使用键盘连接到Win/Mac系统设备时，通过VIA改键设置任意按键
为MO(3)保存后，长按MO(3)按键层3将被激活使用
2.4Ghz无线连接
键盘拨动开关拨动到右边即为2.4G模式：
1. 请先将键盘拨动开关切换到2.4Ghz无线模式
2. 通过USB接口将2.4Ghz接收器插入设备，此时键盘即可正常连接并使用
3. 键盘强制对码方式：长按FN+R键进行对码，此时，R键LED灯会连续快速
闪烁，此时 再将接收器插入电脑USB, 即可完成强制对码，2.4G连接成功后R
键停止闪烁并恢复当前背光灯颜色
2.从赤度官网下载CIDOO QK61.JSON文件并上传到VIA软件，打开VIA软件后:
点击Load 导入JSON文件 如下图
自动休眠模式
多媒体按键
FN+A: Windows 系统 FN+S: Mac 系统
FN+1: F1 FN+2: F2
FN+3: F3 FN+4: F4
FN+5: F5 FN+6: F6
FN+7: F7 FN+8: F8
FN+9: F9 FN+0: F10
FN+-_: F11 FN+ =+: F12
FN+Esc : ` FN+WIN : 锁定\解锁 WIN键
FN+ T :PRTSC FN+Y: SCROLL
FN+U: PAUSE FN+G:INSERT
FN+H:HOME FN+J:PG UP
FN+B:DELETE FN+N:END
FN+M: PG DN FN+/?:↑
FN+ALT-R:← FN+ APP:↓
FN+ CTRL-R: →
宏设置
CIDOO QK61按键中没有设置宏按键，在此可以通过VIA软件映射宏按键到你
想要的按键上，实现宏快捷操作.
CIDOO QK61 默认配置了0-3层4个层级，每个单独的按键都可以拥有多个功能.
这对于较小的键盘很重要，因为它们没有足够的按键来实现所需的所有功能。
特殊键设置
在此可以通过按键变更功能将特殊按键替换到你想要的按键上，实现该功能的快
捷操作.
其他客制化
CIDOO QK61提供其他功能按键的客制化改键
minimalistic design inheriting the originality style
THIS IS EXACTLY WHAT I LIKE THANK YOU
QMK固件更新方法：有线模式下按住ESC上电进入 DFU模式
三模（有线/蓝牙5.0/2.4G无线）对码连接方法
有线模式
键盘无按键操作5分钟后背光关闭，按任意按键唤醒键盘
键盘无按键操作30分钟后进入深度休眠模式，蓝牙断开，按任意按键将退出深
度休眠模式，RGB背光亮起并回连蓝牙
充电指示及电量指示：
CIDOO QK61默认定制的0-4层键盘布局图
层0：当你使用键盘连接到Win系统设备时，层0将被激活使用
层0：当你使用键盘连接到Mac系统设备时，层0将被激活使用，其中按键
Left Alt=Left Option Left Win=Left Command Right Alt= Right Option
keyboard ,and the keyboard will re-connect to the last device when power on
the keyboard again.
3.Installation is completed and VIA software connected successfully if show
below picture .
Special keys setting
Here you can remap the key to replace the special key to the key you want,
to achieve the quick operation of the function.
2.4G mode Usage method:
Thank you for purchasing our QMK /VIA QK61 mechanical keyboard , We
hope you will be pleased with both the product and service you received .
The following is a detailed introduction of the functions and operation method
of this product.
FN+B:DELETE FN+N:END
FN+M: PG DN FN+/?:↑
FN+ALT-R:← FN+ APP:↓
FN+ CTRL-R: →
Battery level check
Press and hold FN+ SHIFT_R can check the battery and charging status ,
Battery level indicator .From !1 to )0 stands for 10%~100% ( estimate only )
un-hold to exit .
1.Please toggle the mode switch to 2.4Ghz mode . From left to right are BT
→Wired→ 2.4Ghz T. ”R” key will flashes green .
Default Hot Keys
Hold FN + listed keys to activate
Device Firmware Upgrade Mode : Hold ESC key in wired mode and plug in
cable
Right SHIFT key light on red indicate that keyboard is charging ; Right SHIFT
Key will back to default backlight when fully charged or un-charge .
Layer3：This layer will be activated when your keyboard’s system toggle
switched to Windows or Mac and keymapped any keys to MO(3) and then
press it.
CIDOO QK61 VIA software provides many different RGB lighting effects by
default. You can change the lighting brightness, speed, color and customize
the lighting effect you want. You can also change the key to operate the
lighting effect you set.
LED Setting Keys
USB Wired/BT5.0/2.4G Tri Mode Pairing Method:
Wired Mode:
2.Plug the receiver into USB port of the device .The “R “ key will cease
flashing and the keyboard backlight turns to the default of RGB backlight effect,
it means connection successful.
Others custom
CIDOO QK61 provides other customized remap to other functional keys.
Custom Configuration
CIDOO QK61 supports remap the keys via QMK/VIA firmware in wired mode
and 2.4G mode
Note：Make sure your keyboard is properly plugged into your computer device
2.4Ghz pairing instruction
CIDOO QK61 default customized 0-3 layer keyboard layout.
If the VIA software cannot recognize your keyboard, please reach out our
support to get the instruction.
Key description
Please toggle the mode switch to middle (wired mode ). and then insert USB
cable into your computer, the keyboard backlight lights on and turns to the
default of RGB backlight effect, it means connection successful.
VIA installation steps see below :
1.Please visit “https://github.com/WestBerryVIA/via-releases/releases” to
download the latest VIA application for your computer’s OS here .
VIA automatically detects your compatible keyboard if it's plugged in. Keyboard
memory is persistent, which means that wherever you plug in keyboard, it
remembers the settings.
Bluetooth® Pairing Instructions:
Perform the following steps to pair this keyboard with your device(s).
Layer0：This layer will be activated when your keyboard connected to the
Windows system.
Layer0：This layer will be activated when your keyboard connected to the
Mac system.
Left Alt=Left Option Left Win=Left Command Right Alt= Right Option
The keyboard 2.4Ghz mode is default paired . If you need to re-pair 2.4Ghz
mode , Please perform the following operations :
Long press FN+R key enter 2.4g pairing mode . At this time, "R" key flashes
green color quickly. Insert 2.4G dongle to USB port . After the connection is
successful, "R" key stops blinking and goes to steady color and turns to the
default of RGB backlight effect, it means connection successful.
Auto sleep mode
CIDOO QK61
FN+ .> : LED backlight brightness Increase
FN+ ,< : LED backlight brightness decrease
FN+ ;: : LED backlight hue increase
FN+ ’” : LED backlight hue decrease
FN+ [{ : LED backlight speed decrease
FN+ ]} : LED backlight speed increase
FN+BACKSPACE: Toggle ON/ OFF Backlight
FN+\|:Toggle LED light mode
FN+V: LED backlight saturation increase
FN+C: LED backlight saturation decrease
FN+Z : Toggle LOGO LED light mode
FN+X: Toggle LOGO LED light color
FN+ space: Long press FN+ Space for 3 seconds to reset the keyboard to
the factory setting.
2.4G...
2.4Ghz Mode
Brght+ Backlight Increase
Lock Win Lock Windows Key
USB Mode Switch to USB Mode
RGB SPD RGB Speed Decrease
Brght-
Backlight Decrease
RGB SPI RGB Speed Increase
Fn1(3)
Layer 1 will be activated when holding this key
MO(2)
Layer 2 will be activated when holding this key
MO(3)
Layer 3 will be activated when holding this key
In Bluetooth and 2.4G mode, after 5 minutes without key press ,the backlight
will turn off to conserve the battery , any key press will be awaken the keyboard.
Hue+
Hue Increase
Sat+
Light Saturation+
RGB Md+ RGB Mode Next
RGB Tog... RGB Toggle
Win...
Windows Mode
Mac...
Mac Mode
Hue-
Hue Decrease
Sat-
Light Saturation-
BT1
Bluetooth Device 1
BT2
Bluetooth Device 2
BT3
Bluetooth Device 3
On the top half of VIA software, choose one key by your mouse, and then
select the key that you wanted on the bottom half of VIA software, and it was
effected.
Firstly switch to VIA software key tester table, there is not any background
color before you press any keys, when you want to test this key you have
programmed, press it and the background color will change to red color
means it works, otherwise it is not work.
1.This Bluetooth keyboard can be paired with up to three devices at the same
time. Please toggle the mode switch to the Bluetooth mode .(From left to right
are BT →Wired →2.4Ghz). Q key or W key or E key will flash .
2.Long press FN + Q or FN+W or FN+E for 3~5 seconds to enter pairing mode.
At this time, the Q /W/E key will flash blue quickly indicates that keyboard is
ready to connect.
Layer1：This layer will be activated when your keyboard’s system toggle
switched to Windows or Mac and press Fn1(3) key.
See below for more information about configuration
2.Download JSON files from CIDOO website and click load to Import JSON
file accordingly .See following photo.
In Bluetooth mode, the deep sleep mode will be entered after 30 minutes
without key press, and the Bluetooth is disconnected. Press any key to exit the
deep sleep mode, and the RGB back light will turn up and connect back to
Bluetooth.
3.Open the Bluetooth settings on your device and scan for available devices.
Locate and select the device name entry. “CIDOO QK61-1” for FN+Q ;
“CIDOO QK61-2” for FN+W , “CIDOO QK61-3” for FN+E .
Battery Charging Indicator：
4. Once the keyboard has connected to your device, the Q/W/E key will cease
flashing, and light on after Bluetooth pairing was successful. Short press "FN"
and "Q" or “FN” and "W" or “FN” and “E” keys to switch paired Bluetooth device.
Layer2：This layer will be activated when your keyboard’s system toggle
witched to Windows or Mac and keymapped any keys to MO(2) and then
press it.
When the battery power of the keyboard is low (the battery power is less than
3.5V), the FN key will keep flashing red reminds low battery .
Macros setting
CIDOO QK61 does not have physical multimedia keys, you can remap the
keys through the VIA software to achieve the function.
CIDOO QK61 is configured with 4 layers from 0 to 3 by default, and each
individual key can have multiple functions.
This is important for smaller keyboards, where there aren’t enough physical
keys to do all the functionality you need.
The Bluetooth connection has memory . It will disconnect when power off the
FN+A: Windows System FN+S: Mac System
FN+1: F1 FN+2: F2
FN+3: F3 FN+4: F4
FN+5: F5 FN+6: F6
FN+7: F7 FN+8: F8
FN+9: F9 FN+0: F10
FN+-_: F11 FN+ =+: F12
FN+ Esc : ` FN+WIN : Lock/unlock WIN key
FN+ T :PRTSC FN+Y: SCROLL
FN+U: PAUSE FN+G:INSERT
FN+H:HOME FN+J:PG UP