Текст страницы
Operation
Pos. Symbol
Explanation
Dehumidification mode
▶Press the Mode key repeatedly until
appears on the display.
▶Set the required temperature with the . and / keys.
The fan speed cannot be adjusted in dehumidification mode.
3
Value display: shows the set temperature, fan speed
or (when timer is activated) the timer setting as
standard.
Infographic: transmission indicator; lights up when
the remote control sends a signal to the indoor unit.
Infographic: ON/OFF timer active.
Heat mode
▶Press and hold the Mode key until
appears on the display.
▶Set the required temperature with the . and / keys.
▶Press the
key until the required air speed is reached.
Value display: shows the current fan speed. There are
several output stages (bars) and the AUTO setting for
automatic control.
4
Infographic: automatic vertical swing function active.
(up/down).
Infographic: Turbo cool/Turbo heat is active.
Table 8 Symbols in the display
If the outside temperature is very low, the heating capacity of the air
conditioning system may not be sufficient. We recommend connecting
additional heat sources.
3.3
Using the remote control
The signal range is 8 m. If objects are in the way or certain fluorescent
lamps are used in the same room this can affect transmission of the
signal.
3.5
Setback mode
The purpose of this function is to save energy during idle times. After an
hour, the device heats or cools less intensely. To do this, the set
temperature is changed by 1 °C. After two hours the set temperature
changes by a further 1 °C. The new temperature then remains constant.
▶Point the remote control towards the signal receiver window of the
unit and press the desired key.
The unit emits a beep when it receives a signal.
▶Press the
key to switch the setback mode on or off.
NOTICE
The function is not available in dehumidification mode and Fan Mode.
The remote control may be permanently prevented from working
correctly.
▶Do not expose the remote control to direct sunlight.
▶Do not leave the remote control near a heating appliance.
▶Protect the remote control from moisture and impacts.
3.6
Follow me function (Follow Me)
The function activates the remote control at the current location in order
to measure the temperature at 3-minute intervals. The indoor unit is now
controlled with reference to these measurements.
3.4
Setting main operating mode
Switch function on or off:
▶Press the Set key repeatedly until
appears.
▶Confirm with OK key.
Turn unit on/off
▶Press the K key to switch the device on or off:
The device starts in the set operating mode.
Settings can also be made when the device is switched off. The device
saves the settings, and also retains them in the event of a power failure.
The Follow Me function is only available in cooling mode, heating mode
and automatic mode.
Automatic mode
In automatic mode, the device automatically switches between heating
and cooling mode to maintain the desired temperature.
▶Press the Mode key repeatedly until
appears on the display.
▶Select the required temperature with the . and / keys.
3.7
Setting timer
ON and OFF timers can be set to between 0 and 24 hours, in 30-minute
increments for the first 10 hours, then in 1-hour increments. If 0 hours is
set, the timer is cancelled.
The fan speed cannot be adjusted in automatic mode.
Setting the on timer
▶Press the
key until the
symbol appears.
▶Press the . or / key to set the desired time.
The setting is applied shortly afterwards.
Cooling mode
▶Press the Mode key repeatedly until
appears on the display.
▶Press the
key until the required air speed is reached.
▶Select the required temperature with the . and / keys.
Setting the off timer
▶Press the
key until the
symbol appears.
▶Press the . or / key to set the desired time.
The setting is applied shortly afterwards.
Fan (Only) Mode
▶Press the Mode key repeatedly until
appears on the display.
▶Press the
key until the required fan speed is reached. AUTO can
be selected to enable automatic control.
Cancelling timer
▶Press the
key to select the corresponding timer.
▶Set 0.0 hours.
The timer is cancelled after a short time.
The temperature cannot be adjusted or displayed in Fan Mode.
Climate Line 2000 – 6721831694 (2021/02)
22