Текст страницы
Cleaning instructions
Indoor unit
Aluminium fi n
Front panel
POWER
TIMER
i AUTO-X
NONOE-G
AUTO COMFORT
QUIET
Human activity
sensor
nanoe-G
Generator
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see nanoe-G indicator blinks or
error code “H99”. Please consult authorised
dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fi n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Air fi lters
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
nanoe-G Generator
Every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Human activity sensor
Do not hit or violently press or poke it with a sharp
object. This can lead to damage and malfunction.
Front panel
Wash gently and dry.
Remove the front panel
Pull out
2
Air fi lters
Every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Attach air fi lter
POWER
TIMER
i AUTO-X
NONOE-G
AUTO COMFORT
QUIET
Raise
1
Close it securely
Insert into the unit
Insert at both sides
1
POWER
TIMER
i AUTO-X
NONOE-G
AUTO COMFORT
QUIET
2 Close down
3 Press both ends of the front panel
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL/
HEAT operation. After 15 minutes of
operation, it is normal to have the following
temperature difference between air inlet and
air outlet vents:
COOL: ≥8 °C HEAT: ≥14 °C
For extended non-use
• Activate HEAT mode for 2~3 hours to remove
moisture left in the internal parts thoroughly to
prevent mould growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
4 For CS-E18RKDW, CS-E24RKDW,
CS-E28RKDS, CS-ME21RKD:
Press at center of the front panel.
10