Текст страницы
English
1 Kitbox
1 Charger
1 Side handle
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N-models. Battery packs and chargers are not included
with NT models. B models include Bluetooth® battery packs.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respective owners.
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
tool is compatible with Bluetooth® Battery Technology and with
the DeWALT Tool Connect™ App. Please see your Tool Connect™
App instruction manual for more information.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: Use only DeWALT battery packs and chargers.
Date Code Position
The date code, which also includes the year of manufacture, is
printed into the housing.
Example:
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
NOTE: Make sure your battery pack 8 is fully charged.
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
To Install the Battery Pack into the Tool
Handle
2016 XX XX
Year of Manufacture
Description (Fig. A, B)
1 Trigger switch
1. Align the battery pack 8 with the rails inside the tool’s
2 Forward/reverse control button
3 Worklight
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
4 Chuck
5 Torque adjustment collar
To Remove the Battery Pack from the Tool
6 Gear shifter
1. Press the release button 9 and firmly pull the battery pack
7 Side handle
8 Battery pack
out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
9 Battery release button
10 Belt hook
11 Mounting screw
12 Magnetic bit holder
13 Worklight switch
14 Low worklight mode
15 Medium worklight mode
16 Spotlight mode
17 Fuel gauge
18 Main handle
Fuel Gauge Battery Packs (Fig. B)
Some DeWALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button
17 . A combination of the three green LED lights will illuminate
designating the level of charge left. When the level of charge
in the battery is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Intended Use
These drills drivers/hammerdrills are designed for professional
drilling, percussion drilling and screwdriving applications. This
10