Текст страницы
Noise information
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
Always wear ear protection if the sound
pressure exceed 85 dB(A).
•• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of elec
tric shock.
** Declaration of conformity
•• If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock. NOTE! The term "residual current
device (RCD)" may be replaced by the term "ground
fault circuit interrupter (GFCI)" or "earth leakage circuit
breaker (ELCB)".
We declare under our sole responsibility that the
product described under "Power tool specifications"
is in conformity with all relevant provisions of the di
rectives 2006/42/EC including their amendments and
complies with the following standards:
EN 60745-1,
EN 60745-2-1.
•• Warning! Never touch the exposed metal surfaces
on gearbox, shield, and so on because touching metal
surfaces will be interfered with the electromagnetic
wave, thus causing potential injury or accidents.
Personal safety
Certification
Wu Cunzhen
manager
** - for power tools with voltage 220-230 V.
Merit Link International AG
Stabio, Switzerland, 24.12.2020
•• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
WARNING - To reduce the risk of injury,
user must read instruction manual!
•• Use personal protective equipment. Always
wear eye protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
General safety rules
•• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to
power source and / or battery pack, picking up or
carrying the tool. Carrying power tools with your fin
ger on the switch or energising power tools that have
the switch on invites accidents.
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn
ings and instructions may result in electric
shock, fire and / or serious injury.
Save all warnings and instructions for future refer
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat
ed (cordless) power tool.
•• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left at
tached to a rotating part of the power tool may result
in personal injury.
Work area safety
•• Do not overreach. Keep proper footing and bal
ance at all times. This enables better control of the
power tool in unexpected situations.
•• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
•• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
•• Do not operate power tools in explosive atmos
pheres, such as in the presence of flammable liq
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
•• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
•• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
Electrical safety
•• Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
•• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un
modified plugs and matching outlets will reduce risk
of electric shock.
•• Warning! Power tools can produces an electromag
netic field during operation. This field may under some
circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to con
sult their physician and the medical implant manufac
turer before operating this power tool.
•• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Power tool use and care
•• Do not expose power tools to rain or wet condi
tions. Water entering a power tool will increase the risk
of electric shock.
•• The persons with lowered psychophysical or men
tal aptitudes as well as children can not operate the
•• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
19
English