Текст страницы
English
Visible radiation. Do not stare into light.
n
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
NOTE: Make sure your battery pack 1 is fully charged.
To Install the Battery Pack into the Tool Handle
Date Code Position (Fig. B)
The date code 6 , which also includes the year of manufacture,
is printed into the housing.
Example:
1. Align the battery pack 1 with the rails inside the tool’s
2021 XX XX
Year and Week of Manufacture
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1. Press the release button 2 and firmly pull the battery pack
Description (Fig. A)
Components
out of the tool handle.
2. Insert battery pack into the charger as described in the
1 Battery pack
charger section of this manual.
2 Battery release button
3 Variable speed trigger switch
4 Forward/reverse control button
5 Torque adjustment collar
6 Keyless chuck
7 Chuck sleeve
8 Speed selector
9 Worklight
10 Worklight switch
11 Belt hook (Optional accessory)
12 Mounting screw
13 Bit holder (Optional accessory)
Fuel Gauge Battery Packs (Fig. B)
Some DeWALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button 17 . A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end‑user application.
14 Side handle
15 Main handle
Belt Hook and Magnetic Bit Holder (Fig. A)
Optional Accessories
WARNING: To reduce the risk of serious personal
injury, ONLY use the tool's belt hook to hang the
tool from a work belt. DO NOT use the belt hook for
tethering or securing the tool to a person or object during
use. DO NOT suspend tool overhead or suspend objects
from the belt hook.
WARNING: To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure.
Intended Use
These hammerdrills are designed for professional drilling,
percussion drilling and screwdriving applications.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
CAUTION: To reduce the risk of personal injury or
damage, DO NOT use the belt hook to hang the drill
while using as a spotlight.
IMPORTANT: When attaching or replacing the belt hook 11 or
magnetic bit holder 13 , use only the mounting screw 12 that
is provided. Be sure to securely tighten the screw.
The belt hook and magnetic bit holder can be be attached
to either side of the tool using only the screw provided, to
accommodate left- or right- handed users. If the hook or
magnetic bit holder is not desired at all, it can be removed from
the tool.
ASSEMBLY AND ADJUSTMENTS
Variable Speed Trigger Switch (Fig. A)
To turn the tool on, squeeze the variable speed
trigger switch 3 . To turn the tool off, release the trigger switch.
WARNING: Use only DeWALT battery packs and chargers.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.
10