Текст страницы
English
IMPACT DRILL DCD999
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
Congratulations!
You have chosen a BernerDeWALT tool. Years of experience,
thorough product development and innovation make
BernerDeWALT one of the most reliable partners for professional
power tool users.
Technical Data
DCD999
Voltage
VDC
18
Type
1
Battery type
Li-Ion
No load speed
Drill, Driver/Hammer
1st gear
min-1
0–450/500
2nd gear
0–1300/1500
3rd gear
0–2000/2250
Impact rate
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
1st gear
min-1
0–8500
2nd gear
0–25500
3rd gear
0–38250
Max. torque (hard/soft)
DCB546
DCB547
hard
Nm
112
126
soft
Nm
66
67
Chuck capacity
mm
1.5–13
Maximum drilling capcity
Wood
mm
55
Metal
15
Masonry
13
Weight (without battery pack)
kg
1.61
Noise values and vibration values (triax vector sum) according to EN60745-2-1:
Impact Drill
DCD999
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑1:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
dB(A)
3
LPA (emission sound pressure level)
dB(A)
94
LWA (sound power level)
dB(A)
105
K
(uncertainty for the given
sound level)
Drilling into metal
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
19.08.2020
Vibration emission value ah,D =
m/s2
2.7
Uncertainty K =
m/s2
1.5
Impact drilling
a
Vibration emission value ah,ID =
m/s2
12.5
Uncertainty K =
m/s2
1.5
Screwdriving
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
Vibration emission value ah =
m/s2
< 2.5
Uncertainty K =
m/s2
1.5
DCB184
DCB546
DCB547
Power
UWO
860
1219
1296
3