Текст страницы
MANUAL
33
EN
1 GENERAL PROVISIONS
1 GENERAL PROVISIONS
The shock battery nut (hereinafter referred to as the nut, tool, product) is used for screwing
and screwing in threaded connections and fasteners, mounting bolts, nuts and anchors.
The product has a household purpose. Please note that this equipment is not intended
for heavy industrial work. Improper use of the product is the basis for refusal of warranty
repair. It is strongly recommended that you read all the points in this operating manual
before using the product in order to avoid dangerous situations.
2 TECHNICAL REQUIREMENTS
2 TECHNICAL REQUIREMENTS
Table 1
Parameter name
Parameter value
SWI 18BL-380V
SWI 18BL-650V
Motor type
Brushless (BL-motor)
Power supply voltage
18 В UNI-M
Battery type
18 V UNI-M Li-Ion (Li-ion), rechargeable
Compatible battery:
BL1815, BL1820, BL1830, BL1840B, BL1850B, BL1860B
STАVR: SB 18-2-01, SB 18-4-01, SB 18-6-01 1
Kоlner: KB 18-2ST-01, KB 18-3ST-01, KB 18-3ST
LED lighting
Available
Сhuck
1/2" (12,7 mm)
Bolt
М8 - М20
М10 - М22
Torque (per revolution)
150/380 Nm
150/320/650 Nm
revise torque
600 Nm
800 Nm
Torque (for tightening)
0 - 1900/2600 rpm
0 - 1700/2200/2700 rpm
Impact frequency
0 - 3000/3500 bpm
0 - 2200/2700/3200 bpm
Safety Class
Grade III
Overall dimensions
130х80х210 мм
135х85х210 мм
Weight
1,1 кг
1,5 кг
Ambient temperature / humidity
in operation
+1 °С … +40 °С / ≤ 80 %
in storage and transportation
+5 °С … +50 °С / ≤ 80 %
Technical requirements of the charger
Table 2
Name of the parameter
Parameter value
Rated voltage
220-240 V ~
Rated frequency
50 Hz
Output voltage
21 В
Output current
3А
Security class
II class