Текст страницы
D-Link DGS-1008D Unmanaged Gigabit Ethernet Switch
Provide for Adequate Ventilation
CAUTION: Do not place any device on top of Switch, or place the Switch on top
of any device or object that will block the free flow of air through the ventilation
slots on the sides, top, and bottom of the Switch’s case. In addition, care should
be taken not to locate the Switch next to, on top of, or underneath any device that
generates a significant amount of heat. For the Switch to perform at its optimal
level, the Switch must have adequate ventilation to prevent the Switch from
overheating and becoming damaged.
Power On
Plug one end of the AC to DC power converter into the power connector of the Switch and the other end into the
local power source outlet.
After the Switch is powered on, the LED indicators will momentarily blink. This blinking of the LED indicators
represents a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch
back in.
8