Текст страницы
ENGLISH (Original instructions)
Explanation of general view
1
Lock button
2
Switch trigger
3
Speed adjusting dial
4
Orbits per minute
5
Dial setting
6
Screw
7
Front grip
8
Grip base
9
Makita logo
10
Dust bag
11
Dust nozzle
12
Groove
13
Front fixing cardboard
14
Front side of paper dust bag
15
Claws
16
Upper part
17
Notch
18
Guide
19
Holding tab
20
Dust box
21
Latch
22
Sponge pad
23
Felt pad
24
Wool bonnet
SPECIFICATIONS
Model
BO5040
BO5041
Paper size....................................................... 125 mm
125 mm
Orbits per minute (min–1)................................ 12,000
4,000 – 12,000
Dimensions (L x W x H) ................................. 218 mm x 123 mm x 153 mm
218 mm x 123 mm x 153 mm
Net weight ...................................................... 1.4 kg
1.4 kg
Safety class ....................................................
/II
/II
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
7.
Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
8.
Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
cause a personal injury.
SAVE THESE INSTRUCTIONS.
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
GEA010-1
General Power Tool Safety Warnings
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
GEB021-4
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released.
• Switch can be locked in “ON” position for ease of oper-
ator comfort during extended use. Apply caution when
locking tool in “ON” position and maintain firm grasp on
tool.
SANDER SAFETY WARNINGS
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button and then release the switch trig-
ger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
1.
Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2.
Hold the tool firmly.
3.
Do not leave the tool running. Operate the tool
only when hand-held.
4.
This tool has not been waterproofed, so do not
use water on the workpiece surface.
5.
Ventilate your work area adequately when you
perform sanding operations.
6.
Some material contains chemicals which may be
toxic. Take caution to prevent working dust inha-
lation and skin contact. Follow material supplier
safety data.
5