Текст страницы
003744
Insert the notch of the paper dust bag into the guide of the
paper dust bag holder. Then install the paper dust bag holder
set on the tool.
1
2
- Notch
- Guide
003745
OPERATION
003746
Sanding operation
CAUTION:
•
Never switch on the tool when it is in contact with the
workpiece, it may cause an injury to operator.
•
Never run the tool without the abrasive disc. You may
seriously damage the pad.
•
Never force the tool. Excessive pressure may decrease
the sanding efficiency, damage the abrasive disc or
shorten tool life.
Hold the tool firmly. Turn the tool on and wait until it attains
full speed. Then gently place the tool on the workpiece sur-
face. Keep the pad flush with the workpiece and apply slight
pressure on the tool.
Polishing operation
CAUTION:
•
Use only a Makita genuine sponge pad, felt pad or wool
pad (optional accessories).
•
Always operate the tool at low speed to prevent work
surfaces from damage/burning.
10