Текст страницы
EN
ELECTRICAL CONNECTION
KCT 9..., KCT 7... • 400 V • 3N~
KCT 6... • 400 V • 2N~
Before connecting the cooking hob
to the mains power supply, make
sure that:
220 – 240 V
220 – 240 V
220 – 240 V
400 V 400 V
• the plant characteristics are
such as to follow what is
indicated on the matrix plate
placed at the bottom of the
working area,
• the mains supply has an
efficient ground connection
complying with all applicable
laws and regulations.
N
N1
N2
L2
L1
L
KCT 6..., KCT 4... • 220 – 240 V • 2 + 2N~
220 – 240 V
Correct grounding is a legal
requirement. If the appliance is not
pre-fitted with a power cable and/ or
plug, use only suitable cables and
plugs capable of handling the power
specified on the appliance's data
plate and capable of resisting heat.
The power cable should never
reach a temperature 50 °C above
ambient temperature at any point
along its length.
220 – 240 V
N2
N1
L2
L1
KCT 3... • 220 – 240 V~
If the appliance is to be connected
directly to mains terminals, fit a
switch with minimum aperture of 3
mm between the contacts. Make
sure that the switch is of sufficient
capacity for the power specified on
the appliance's data plate, and
c o m p l i a n t w i t h a p p l i c a b l e
regulations. The switch must not
break the green-yellow earth wire.
The socket or switch must be easily
reachable with the cooking hob fully
installed.
220 – 240 V
N
L
N2
N1
L2
L1
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respected.
8