Текст страницы
must comply with the relevant local standards. If the electrical
installation is not suitable, call a qualified electrician to make the
necessary arrangements.
-Check whether there is any damage on any part of the product. If
there is any damage to the product, do not install it.
-Make sure that there is a space behind the section where you will
place the device. This space is necessary for the ventilation system to
function properly.
-If there is a drawer under the oven, a shelf should be placed between
the oven and the drawer.
-Kitchen cabinets must be level with the product and must be fixed.
-Surfaces, synthetic laminates and adhesives used must be heat
resistant (minimum 100°C).
-Do not install the product next to refrigerators or coolers. The heat
emitted by the product increases the energy consumption of cooling
devices.
-Do not use the lid and/or handle to carry or move the product.
After making the above-mentioned preparations, you can proceed
with the installation according to the following sequence.
3.2. First cleaning,
Clean your product for the first time according to the order below.
-Remove all packaging materials.
-Remove all accessories from the product. Clean the accessories with
detergent water and a soft cleaning sponge.
56