Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
JV101D
Length of stroke
18 mm
Strokes per minute
0 - 2,900 min
-1
Blade type
B type
Max. cutting capacities
Wood
65 mm
Mild steel
2 mm
Aluminum
4 mm
Rated voltage
D.C. 10.8 V
Battery cartridge
BL1015, BL1020B
BL1040B
Overall length
232 mm
250 mm
Net weight
1.7 kg
1.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Noise
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (LpA) : 80 dB(A)
Sound power level (LWA) : 91 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: cutting boards
Vibration emission (ah,B) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Jig Saw
Model No./ Type: JV101D
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents: EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
23.9.2015
Work mode: cutting sheet metal
Vibration emission (ah,M) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
5
ENGLISH