Текст страницы
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
M4301
Length of stroke
18 mm
Blade type
B type
Max. cutting capacities
Wood
65 mm
Mild steel
6 mm
Strokes per minute (min
-1)
0 - 3,100
Overall length
214 mm
Net weight
1.9 kg
Safety class
/II
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Symbols
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
DOUBLE INSULATION
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory and
saw blade program, the tool can be used for many pur-
poses and is very well suited for curved or circular cuts.
Power supply
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-11:
Work mode: cutting boards
Vibration emission (ah,B) : 8.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: cutting sheet metal
Vibration emission (ah,M) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
The typical A-weighted noise level determined accord-
ing to EN62841-2-11:
Sound pressure level (LpA) : 82 dB(A)
Sound power level (LWA) : 93 dB (A)
Uncertainty (K) : 3 dB(A)
5
ENGLISH