Текст страницы
ENGLISH en
12. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2002/96/EC
on waste electrical and electronic equipment and its
implementation in national legal systems.
13. Technical Specifications
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
T1
=Maximum material thickness in wood
T2
=Maximum material thickness in non-
ferrous metals
T3
=Maximum material thickness in sheet
steel
n0
=Stroke rate at idle speed
P1
=Rated input power
P2
=Power output
m
=Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~ AC Power
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on the operating conditions, the
condition of the power tool or the accessories.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
ah,CM
=Vibration emission value
(Sawing sheet metal)
ah,CW
=Vibration emission value
(Sawing wood)
Kh,...
=Uncertainty (vibration)
Typical A-effective perceived sound levels:
LpA
=Sound-pressure level
LWA
=Acoustic power level
Kpa, KWA= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
15