Текст страницы
7
EN
Notes:
• It is recommended to clean the shaving block (2)
after every use of the shaver.
Cleaning the shaving block (2)
-
the battery of the shaver can be charged by
connecting the «USB» cord jack to a personal
computer, laptop or to an external «Power Bank»
battery;
-
charge the battery at the temperature from +5° C to
+35° C and relative humidity no more than 80%;
-
if you haven’t used the shaver for a month or longer,
charge the battery completely before using the
shaver.
USING THE ELECTRIC SHAVER
CAUTION! Do not use the shaver if the nets or blades
are damaged.
• The design of the shaver is waterproof, you can wash
the shaver under warm water jet.
• Wash the shaving block under warm water jet (pic.
1).
• Remove the shaving head, pulling it upwards (pic. 2).
• Wash the inside under warm water jet (pic. 3), you
can use the brush (11).
• Wash the shaving head from the inside under warm
water jet (pic. 4).
• Dry the shaving head and the inside on the shaver,
put the shaving head back to its place (pic. 5).
• Put the protection cap (1) on the shaving block (2).
Notes:
The best shaving results are achieved if your skin is dry.
Your skin may need 2-3 weeks to get used to this shaving
system.
-
if the battery charge drops to 15% during the
shaver operation, the symbol (7) « » will light
up, reminding you to charge the battery (see
BATTERY CHARGING);
-
if the symbol (9) «
» lights up during the shaver
operation, clean the shaving block (2);
Blocking from accidental switching on
• Press and hold the on/off button (4) for 3-5 seconds
to activate the lock from accidental switching of the
shaver on, the symbol (8) «
» will light up.
• Remove the protection cap (1).
• Switch the shaver on by pressing the on/off button
(4), the shaver will be switched on and the remaining
battery charge will be indicated on the display (3) with
the digital symbols (10).
• Touching the skin slightly, move the shaving block (2),
back and forth and rotationally.
• It is recommended to slightly stretch your skin on the
face areas which are hard to shave, such as chin.
• Shave hair against hair growth.
• After shaving switch the shaver off by pressing the
on/off button (6), cover the shaving block (2) with the
protection cap (1).