Текст страницы
INSTRUCTION MANUAL
KETTLE BASIC ELEMENTS
A
- lid of kettle
B
- switch with power indicator
C
- handle
D
- base unit
E
- kettle housing
F
- filter (inside the beak)
G
- power supply cord
PERFORMANCE SPECIFICATIONS
Voltage:
220-240 V~ 50 Hz
Rated power:
1850-2200 W
Capacity:
2.0 l
Operating life:
3 years
With delicate handling service life can significantly exceed the period set by the
manufacturer.
The date of manufacture is provided in the serial number of the products: the third
and the fourth digits - month of manufacture, the fifth and the sixth digits - year of
manufacture (since 2010 to 2019). Example: хх1217хххххх – month 12, year 2017.
OPERATION
1. Arrange kettle with the base unit at flat dry heat-resistant surface as close to the
socket as possible.
2. Make sure the kettle is switched off and plug it in.
3. Fill the kettle with water through the top open. Water volume shall be not less
than 0.6 l , but not more than the volume marked at the scale as «MAX».
4. Tightly close the top of the kettle otherwise the kettle won’t switch off when
boiling.
5. Put the kettle on the base plugged in.
6. Push ON pushbutton (С). Operating indicator is ON.
7. Wait till water is boiling. The kettle will switch off automatically. Boiling process
may be stopped manually at any time. In order to make repeated boiling, it is
necessary to wait a while, till the kettle get cold a little and heat-sensing device
arrives to home position.
8. Don’t open the top in the process of boiling and immediately after in order to
avoid thermal injury.
5