Текст страницы
6
EN
BEFORE USING THE KETTLE
After unit transportation or storage at low
temperature, it is necessary to keep it for at least
three hours at room temperature.
• Wash the kettle flask (1) and lid (5) with neutral
detergents, rinse and dry. Wipe the outer surface of
the flask (1) with a slightly damp cloth and then wipe
it dry. Do not use abrasives or coarse scourers for
this.
• Before connecting the kettle, make sure that there
are no moisture drops on the flask (1), the power
cord and the power plug.
• Make sure that the kettle is switched off, the ON/OFF
button (6) is set to the position «0».
• To fill the kettle with water, remove it from the stand
(9), pull the handle (5) upwards and remove the lid.
• Fill the kettle with water up to the mark «MAX» on the
water level scale (2).
• Close the lid (5), make sure that the lid (5) is closed
tightly.
• Set the kettle filled with water on the base (9).
• Insert the power plug into the mains socket.
• To switch the kettle on, set the ON/OFF button (6) to
the position «I», the illumination (8) of the kettle flask
will light up.
ATTENTION! To avoid burns by hot steam, do not
bend over the spout (4).
• Unpack the kettle and remove all the packaging
materials.
• Keep the original package.
• Check the delivery set.
• Read the safety measures and operating
recommendations.
• Examine the kettle for damages, in case of damage
do not plug it into the mains.
• Make sure that the specifications of power supply
voltage specified on the lower panel of the unit or
the base correspond to the specifications of your
mains. When using the kettle in the mains with 60
Hz frequency, the unit does not need any additional
measures.
• Wipe the outer surface of the flask (1) with a clean,
slightly damp cloth to remove dust.
• Place the base (9) of the kettle on a solid steady
flat and non-slip non-metal surface away from heat
sources as far as possible from the edge of the
surface.
• Do not place and do not use the kettle in closed
space, for example, in the cupboard or in closed
structures — this can lead to its breakage, cause
harm to the user or damage to his/her property.
• Once water starts boiling, the kettle will be switched
off automatically and the illumination (8) of the flask
will go out. Pour out water and repeat the water
boiling procedure several times.
• Hot water resulting from the first boilings is not
recommended to consume, you may use it for
domestic needs.
instr BR6106.indd 6
instr BR6106.indd 6
12.07.2024 10:33:17
12.07.2024 10:33:17