Текст страницы
vinegar solution to remove scale. Do not try to use a more concentrated
solution as it may lead to corrosion and leaks from the appliance.
ATTENTION! The guarantee undertakings do not cover the damage caused
by improper scale removal.
can be found on the website https://centek.ru/servis. Service support
contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General
Service Center: OOO «Larina-Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity:
№ ЕАЭС RU C-CN.ВЕ02.В.02135/20 of 26.03.2020.
9. MANUFACTURER AND IMPORTER INFORMATION
Imported to EAEU by: Individualniy Predprinimatel Asrumyan Karo
Shurikovich. Address: Russia, 350912, Krasnodar, ul. Atamana Lysenko, 23,
pgt. Pashkovskiy. Phone: +7 (861) 2-600-900.
CLEANING
- Always disconnect the appliance from power supply before cleaning!
- Clean the outer surfaces of the kettle, if necessary, with a slightly
dampened cloth without detergents.
- Do not submerge the kettle or base in water.
- Do not use abrasive cleaning agents and solvents to clean the kettle.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the
date of sale to the end consumer. With this Warranty Card the Manufacturer
confirms the proper condition of the appliance and undertakes to repair,
free of charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
- SPECIFICAIONS
- Nominal voltage: 220–240 V ~50/60 Hz
- Capacity: 1,8 l
- Nominal рower rating: 1850-2200 W
7. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately
from ordinary domestic waste. You can turn it over to a specialized electric
and electronic appliance disposal and recycling centre.
KETTLE OPERATION
- Before connecting the kettle to power supply ensure that the main
power switch is in the OFF position.
- Hold the kettle by the handle and lift it vertically from the base. Open
the lid. Do not pour hot tap water into the kettle. Open the tap and let
the water flow for some time to make sure it is clean.
- Pour water into the kettle. Check the water level by the level gage in
the housing.
- Do not allow the kettle to overflow above the MAX mark. Caution:in
case of overflow, boiling water may be released through the spout of
the kettle.
- Close the lid until a click is heard. The kettle may not turn on if the lid
is not firmly closed.
- Connect the kettle to power supply. Set the power switch to the
ON position. The LED indicator will go on. The kettle will turn off
automatically when the water boils. The indicator will go out.
- Before dispensing water from the kettle wait for it to stop bubbling. For
a repeated boiling set the switch to the ON position. The power switch
will not be retained in the ON position for several seconds after boiling.
- Do not manually retain the switch in the ON position! The heating may
be stopped at any time by pressing the ON/OFF button.
- Take the kettle from the base vertically, holding it by the handle. Some
condensation may be visible on the top side of the base after the kettle
is removed. This is normal and not a sign of malfunction.
ATTENTION! Do not turn the kettle on the base to avoid spilling out of hot
water! Ensure that the kettle is turned off before removing it from the
base! Do not open the lid during boiling!
1. The guarantee shall be valid if the following documentation conditions
are observed:
- The original Warranty Card shall be filled out correctly and clearly,
indicating the of appliance model, serial number and sale date, the
stamp of the seller company and signature of its representative shall
be available, as well as the stamps on each coupon and the buyer’s
signature in the Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the
buyer fails to provide the abovementioned documents or if the information
contained therein is incomplete, illegible or ambiguous.
2. The guarantee shall be valid if the following operation conditions are
observed:
- the appliance is used in strict accordance with the present manual;
8. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end
user, provided the item will be used in strict accordance with the present
manual and the applicable technical standards. Upon expiry of the service
life please contact the nearest authorized service centre for suggestions
as to further operation of the appliance. The manufacturing date of the
appliance is integrated into the serial number (digits 2 and 3 - year, digits
4 and 5 - month of manufacture). If any questions related to appliance
maintenance should arise, or if the appliance has malfunctions, apply to
the CENTEK TM Authorized Service Center. The address of the service center
5. MAINTENANCE
SCALE REMOVAL
Regularly remove scale using special descaling chemicals. Follow the
instructions on the packaging. You may also use a weak citric acid or
14