Текст страницы
PARTS DESCRIPTION
Indicating the remaining battery
capacity
► Fig.4: 1. Battery indicator 2. Check button
Kettle
► Fig.1
1
Spout
2
Lid
Press the check button to indicate the remaining battery
capacities. The battery indicators correspond to each
battery.
3
Discharge lock button
4
Open-lid button
5
Handle
6
Maximum line
7
Water volume scale
8
Power supply connec-
tor (bottom side)
Battery indicator status
Remaining
battery
capacity
On
Off
Blinking
50% to 100%
Power supply stand
► Fig.2
9
Carrying handle
10
Temperature sensor
20% to 50%
11
Power supply
connector
12
Power switch
0% to 20%
13
Battery cartridge
14
Ground sensing
element
Charge the
battery
FUNCTIONAL DESCRIPTION
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
► Fig.5: 1. Indicator lamps 2. Check button
CAUTION: Always be sure that the appli-
ance is switched off and the battery cartridge is
removed before adjusting or checking function on
the appliance.
Installing or removing battery cartridge
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Remaining
capacity
CAUTION: Always switch off the appliance
before installing or removing of the battery
cartridge.
Lighted
Off
Blinking
75% to 100%
50% to 75%
CAUTION: Hold the appliance and the bat-
tery cartridge firmly when installing or removing
battery cartridge. Failure to hold the appliance and
the battery cartridge firmly may cause them to slip off
your hands and result in damage to the appliance and
battery cartridge and a personal injury.
25% to 50%
0% to 25%
To remove the battery cartridge, slide it from the
appliance while sliding the button on the front of the
cartridge.
Charge the
battery.
The battery
may have
malfunctioned.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click.
► Fig.3: 1. Button 2. Battery cartridge
CAUTION: Always install the battery cartridge
fully. If not, it may accidentally fall out of the appli-
ance, causing injury to you or someone around you.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
NOTE: The appliance does not work with only one
battery cartridge.
9
ENGLISH