Текст страницы
ENG USER MANUAL
Thank you for choosing the products of Armytek. Please read this manual carefully before using the flashlight.
Specifications
• Large central spot and wide side spill
• Pro Powerful electronics provides constant brightness even at a
temperature of -40 °C and not fully charged battery
• Innovative technology allows using any standard 18650 Li-Ion
battery with 10A discharge current. Full protection against short
circuit even in case of contact between magnetic connector and metal
objects
• Solid body made from aircraft-grade aluminium, special matt anti-
abrasive finish without rough knurling
• Special precisely calculated reflector for powerful wide LED and
tempered glass with anti-reflective coating create large central spot
and wide side spill at impressive brightness. Hotspot diameter is
20 meters at 100 meters distance
• Steel striking bezel with matt non-reflective black titanium coating,
which prevents location disclosure, is used for additional protection of
the optical system in the event of a fall and as a shock-crushing tool
• Withstands any recoil due to improved springs and installation of the
driver inside a reinforced capsule filled with protective compound
• Active real-time temperature control to prevent overheating above
+58 °C and warning indication of low battery level
• Standard 1 inch body is compatible with tactical accessories, including
original magnetic remote switch and magnetic mount for quick
one-motion attachment and removal
• Total protection from water, dirt and dust in accordance with IP68
standard — flashlight continues to work even after submersion at
25 meters depth. Withstands fallings from the 10th floor
• Two-phase electronic button retained two levels of pressing similar to
mechanical switch, but became noiseless and 20 times more durable
• Non-flat button allows easy switching on of the flashlight with a palm
• Size-adjustable wrist lanyard, injury-safe ergonomic silicone grip,
heavy-duty nylon holster and steel clip for even more convenient use
• Robust and water resistant magnetic connector
Model
Viking Pro (white light)
Viking Pro (warm light)
Optics
Textured reflector
Brightness stabilization type
FULL (constant light)
Light output
2200 lm
2050 lm
Peak beam intensity
20800 cd
20180 cd
Hotspot : Spill
11°:40°
Beam distance
288 m
284 m
Turbo
2200 lm/1 h 33 min (940 lm after 3 min)
2050 lm/1 h 33 min (875 lm after 3 min)
Main3
400 lm/5 h 13 min
370 lm/5 h 13 min
Modes, light output and runtimes (measured
with 18650 Li-Ion 3500 mAh battery until the
light output drops to 10% of the initial value)
Main2
150 lm/12 h 20 min
140 lm/12 h 20 min
Main1
56 lm/32 h
52 lm/32 h
Strobe2
2200 lm/15 Hz/3 h (940 lm after 3 min)
2050 lm/15 Hz/3 h (875 lm after 3 min)
Strobe1
150 lm/15 Hz/23 h
140 lm/15 Hz/23 h
Power source
1x18650 Li-Ion
Time of charging (18650 Li-Ion 3500 mAh battery)
3 h 40 min
Length/Body diameter/Head diameter
160 mm/25.4 mm/41 mm
Weight without/with battery
135 g/185 g
Ingress protection, Submersion and Impact resistance
IP68. Depth up to 25 m for 5 h. Height up to 25 m
X All the above specifications are test results based on ANSI/PLATO FL 1-2019 Standard. The data may vary due to environment, heat dissipation and other factors.
2
ENG USER MANUAL VIKING PRO
REV_00-0001